The DCM-Pro Manulift was developed for handling loads quickly and safely with only one hand. The new DCM-Pro is based on the lifting unit of the DC-Pro chain hoist and the DSM-C control unit which is connected to it by a helical cable. With right and left-handed operation, the operator only needs one hand to operate the chain hoist and guide the load.
The quick-change coupling enables a wide variety of load handling attachments.
All Manulift load handling attachments are fitted with a connecting pin with a swivel lock, which snaps into the quick-change coupling. It can be easily disconnected by lifting the unlocking sleeve.
20% longer service life and greater efficiency with a minimum SAA Classification M5+ giving a rated service life of 1900 hours.
Improved safety and reliability with a 24 volt contactor control and operating limit switches.
Elapsed operating time counter and diagnostics interface provide information on the operating status - maintenance breaks can be planned.
Gearbox, brake and slipping clutch are maintenance-free for up to 10 years.
Simple installation and commissioning thanks to plug connections - Plug & Lift.
The plug-fitted chain drive facilitates quick and easy replacement of the entire chain drive without having to remove the motor or gear parts. Downtime can therefore be cut significantly.
Delivery is “off the shelf,” no waiting days to solve your hoisting requirements.
Service back-up and Spare Parts direct from our local stock.