Demag 's DRC-DC radio remote control systems have been designed specifically for the purpose of incr chain hoists.onomic and safe operation of Demag’s DC electric chain hoists.
In comparison with regular cable-connected control systems, Demag’s radio remote control systems for chain hoists, when operated from simple transmitters, allow operators to maintain a safer distance from a load.
The transmitters for Demag’s radio remote control systems for chain hoists are available in two sizes and include the following features:
1) DRC-DC six push button transmitter
- six buttons for two-stage control of up to two motion axes
- horn test button
- stop button
- weight including rechargeable battery is 410grams
- IP 55 enclosure Temperature range –20 to +50 ºC
2) DRC-DC ten push button transmitter
- ten buttons for two-stage control of up to three motion axes
- horn test button
- stop button
- two push buttons for special functions
- weight including rechargeable battery is 490grams
- IP 55 enclosure
- temperature ranges from –20 to +50 ºC
Key features and benefits of DRC-DC radio remote control systems for chain hoists:
- impact and temperature-resistant housing
- integrated bump
- frequency hopping and automatic radio frequency management ensures reliable radio transmission signals
- operating statuses and battery capacity shown on display panel
- stop function according to safety category 3/EN 954.
- fast charging two hour transmitter battery - Also operates with conventional Mignon AA batteries
- no registration or operating fees required - the remote control systems for chain hoists have worldwide postal authority approval
- simple wireless hand-held transmitter log-on
Installation for DRC-DC radio remote control systems for chain hoists:
- the controller’s receiver consists of a circuit board for various mounting configurations
- DC 1 to DC 10 chain hoists: the receiver is installed by integrating into a housing or attached to the outside of the chain hoist
- DC 16 to DC 25 chain hoists: the receiver is inserted into the provided slot beneath the chain hoist electrical equipment cover
