The range of LED strips may also be fitted into the new Javelin extrusion, which not only provides an architecturally pleasing linear fitting, but also allows protection for the LEDs as well as can simplify installation.
Starting with the UltraLED range of LED strips, which are the natural progression from Digilin Australia’s range of LinearLight LED strips. The UltraLED strip range produces more light than the LinearLight Range (256 lumens per metre) while using equivalent power. It also has a narrower profile (being only 10mm wide). The UltraLED range is available in warm white with further colours to follow.
As a compliment to the UltraLED, the MicroPower LED strip range uses more closely positioned LEDs. This produces smooth light, without bright spots reproducing the look and feel of neon, particularly when combined with the opal diffuser in the Javelin extrusion. The MicroPower LED range is available now in warm white and blue with further colours to follow.
Next in the release, is the Harlequin RGB LED strip, which is a successor to the LinearLight RGB LED strip. However, unlike the LinearLight RGB strip, the Harlequin strip uses all in one RGB LEDs and as a consequence each colour source is positioned much closer. The result being that the Harlequin produces a less spotty colour mix and the effect of colour fringed shadows is reduced.
The final new strip, from Digilin Australia, is the PowerLED strip. This strip uses 1W LEDs and is still compatible with the Javelin extrusion. The PowerLED strip is fully dimmable and produces 1000+ lumens from only 18W per metre.