Cutter Electronics

Cutter Electronics
5 Highgate Way
Rowville VIC 3178
Tel: 03 9753 9911
Fax: 03 9753 9455

Supplier´s Website


Incorrect details?

close

AdvertiseVisit Website

Contact Details

TrineX CW27 GPS receiver from Cutter Electronics

Cutter Electronics , the Australian distributor for NavSync, has announced the release of TrineX CW27 GPS receiver, Navsync’s new high sensitivity GPS module.

The CW27 is a step on in evolution from the CW20 and also differs from the CW25.

Both the CW20 and the CW25 will continue to be available, but the CW27 does offer advantages for many users.

The CW27 is aimed at the high sensitivity market with the ability to track down to -159dBm compared to -155dBm and -150dBm for the CW25 and CW20 respectively.

The CW27 comes in a 24mm x 24mm smt package, which is easily integratable into the host platform. The ability to utilise A-GPS data is another feature of the CW27 allowing it to get a fix even in harsh GPS conditions.

The CW27 offers low power consumption, approximately 38mA while tracking and 41mA while in acquisition mode. These features make the CW27 ideal for handheld and battery powered applications.

The TrineX CW27 is a self-contained GPS receiver module based on the Nemerix NX3 high sensitivity A-GPS single chip receiver.

Utilising a new baseband processor and RF front end, the TrineX delivers advanced GPS performance in small surface mount package that minimises power consumption, maximising battery life.

The TrineX takes up only 24mm x 24mm of PCB space and connects directly to the host system through a UART using NMEA protocols.

Additionally, the device provides expanded protocols for enhanced performance and flexibility. The device has been specifically developed for mobile hardware platforms running off batteries, where power consumption and small size are critical.

The CW27 delivers enhanced GPS tracking, down to -159dBm, enabling tracking in many obstructed view environments such as urban canyons.

Features:

• Standalone GPS receiver module
• UART – NMEA interface
• Nemerix NX3 GPS chipset
• ARM7 based application processor
• Extremely low signal tracking sensitivity (-159dBm)
• Low power consumption
• Compact design
• Single 3.3VDC supply
• Nemerix Extended Ephemeris (NEX)

Applications

• Battery powered devices
• Navigation
• Vehicle tracking
• Asset tracking
• Personnel tracking
• Location based services
• Security
• Surveying

Cutter Electronics News

New XLamp XP-E and XP-C LEDs from Cutter Electronics (11-Aug-2008)
Cree have launched the XLamp XP-E and XP-C LEDs, which are available from Cutter Electronics. These XLamp XP-E and XP-C LEDs have a small footprint.

Multi-chip XLamp MC-E LED from Cutter Electronics (30-May-2008)
Cree, represented by Cutter Electronics in Australia, has announced that it is demonstrating the new addition to its XLamp LED family—the XLamp MC-E LED—at LIGHTFAIR International in Las Vegas, N.V.

View all  |  RSS Feed

Related Articles

SC 1801 and SC 2804 series of software-controlled PI controller from Erntec (8-Sep-2008)
The new SC 1801 and SC 2804 series of software-controlled PI controller, available from Erntec, enables the universal operation, with one and the same controller, of either electronically commutated drives (BL) or brush-type DC motors with sensors for speed measurement or without sensors, with retroactive generator voltage.

Erntec’s vented slimline shelve (5-Sep-2008)
Erntec’s vented slimline shelve supports weights up to 30kg. It is supplied with mounting hardware and can be made to depths of 600mm, 700mm or 800mm.

Erntec’s fan roof assembly (4-Sep-2008)
Erntec’s fan roof assembly helps to draw cool air near the cabinet base and exhaust the hot air through the cabinet roof.

ASP series of Miniature Stepper Motors from Erntec (3-Sep-2008)
The ASP series of Miniature Stepper Motors, available from Erntec, offers system designers that use battery, capacitor or solar cell based power to include, along with their low consumption processors, mechanical functions normally not possible with other motor technologies.

Motion controllers for brush and brushless DC-Motors from Erntec (2-Sep-2008)
The compact FAULHABER motion controllers, available from Erntec, are now more efficient and can be optionally operated through a RS232 or CAN interface.