Cutter Electronics

Cutter Electronics
5 Highgate Way
Rowville VIC 3178
Tel: 03 9753 9911
Fax: 03 9753 9455

Supplier´s Website


Incorrect details?

close

AdvertiseVisit Website

Contact Details

Multi-chip XLamp MC-E LED from Cutter Electronics

Cree, represented by Cutter Electronics in Australia, has announced that it is demonstrating the new addition to its XLamp LED family—the XLamp MC-E LED—at LIGHTFAIR International in Las Vegas, N.V.

The multi-chip XLamp MC-E being demonstrated retains the same 7mm x 9mm footprint as Cree’s existing XLamp XR family LEDs while providing four times the light output of the existing XR-E.

This combination is designed to enable new applications and reductions in overall system cost. At 9.8W, the XLamp MC-E LED being demonstrated provides up to 790 lumens at 6000K and up to 605 lumens at 3000K.

The XLamp MC-E LED is being demonstrated in both cool and warm white at Cree’s LIGHTFAIR International Booth #2635. Visitors to LIGHTFAIR can also see the XLamp MC-E LED applied in indoor and outdoor luminaire demonstrations at the following booths:

• Acuity Brands Lighting, Booth #2301
• KramerLED, Booth #2650
• Light Engine, Booth #2458

Secondary optics for the Xlamp MC-E LED are also being demonstrated by Carclo, booth #1872, Fraen, booth #2911 and Ledil/Marubeni, booth #1795. The XLamp MC-E LEDs are targeted to be available for purchase next quarter.

“For added design flexibility, our new line of KramerLED luminaires integrates the MC-E LED from Cree in combination with our proprietary NanoOptic refractors,” said Kramer Lighting President, Al Ruud.

“This combination of technology ensures each LED is used to its full potential for good control, uniformity, and intensity.”

“Cree’s XLamp MC-E LED is a lighting-class solution designed to enable applications that require high lumen output in a small footprint,” said Norbert Hiller, Cree vice president and general manager for lighting LEDs.

Cutter Electronics News

New XLamp XP-E and XP-C LEDs from Cutter Electronics (11-Aug-2008)
Cree have launched the XLamp XP-E and XP-C LEDs, which are available from Cutter Electronics. These XLamp XP-E and XP-C LEDs have a small footprint.

TrineX CW27 GPS receiver from Cutter Electronics (11-Jun-2008)
Cutter Electronics, the Australian distributor for NavSync, has announced the release of TrineX CW27 GPS receiver, Navsync’s new high sensitivity GPS module.

View all  |  RSS Feed

Related Articles

Electrical 19 inch cabinets from Erntec (28-Aug-2008)
Erntec offer cabinets for the Electrical industry. Erntec provide 19 inch cabinet built for transmission and distribution.

Scientific 19 inch cabinets from Erntec (27-Aug-2008)
Erntec offer cabinets for the scientific industry. Erntec provide 19 inch cabinet built for gas analysis. This cabinet is made out of mild steel and aluminium.

Welded cabinets from Erntec (26-Aug-2008)
The welded cabinets, from Erntec, offer higher IP protection rating and are generally used in aggressive or outdoor environments.

SB-3624x Synchro Angle Position Indicator half-size PCI card from Allied Data Systems (25-Aug-2008)
Data Device Corporation (DDC), represented in Australia by Allied Data Systems, have released the new SB-3624x Synchro Angle Position Indicator ‘API’ half-size PCI card. The SB-3624x Synchro Angle Position Indicator half-size PCI card features six input channels with an on-board reference oscillator and optional transformer isolation all on a single half-size PCI card.

Enhanced SMC board-to-board adapter from Erntec (25-Aug-2008)
The new SMC board-to-board-adapter, from ERNI Electronics, is an addition to the extensive SMC 1.27mm (.050") pitch connector line, offering flexibility in its board-to-board heights ranging from 20mm to 40mm in 2mm increments.