Crompton Instruments (Australia)
Unit 1/4 Reaghs Farm Rd
Minto NSW 2566
Tel: 1300 656 090
Fax: 1300 731 331

Supplier´s Website
Enquire now

Incorrect details?

close

Enquire NowVisit Website

Contact Details

New Automatic transfer switch available from Crompton Instruments

SWITCH-ATS automatic transfer switch

The new Crompton Instruments ’ SWITCH-ATS automatic transfer switch from Tyco Electronics is designed to monitor the incoming AC mains signal for three phase and single phase applications.

Microprocessor technology allows exact measurement, set point adjustment and timing functions with the parameters to be simply programmed and displayed from the front panel.

In the event of a mains voltage failure of any phase, the remote start relay output is energised and the unit automatically transfers the load from the mains to the generator.

The switch is designed for use with Crompton Instruments controllers but the flexibility allows the product to also interface directly with a range of generator control systems.

A 10mm 4-digit red LED display clearly shows the mains voltage, alternator voltage and program parameters on the front panel of the SWITCH-ATS automatic transfer switch.

In addition, several status LED indicators display the current operating status of the device.

Technical details of the product include an operating temperature range from -25 up to +70 degrees Celsius, protection class IP65 to front panel and mains and generator voltage accuracy of 31% FS.

The measuring range for mains and generator voltage is 35 up to 300V and a frequency range from 15.6 up to 99.9Hz.

Crompton Instruments (Australia) News

Crompton Instruments Integra 1630 Digital Metering System available with BACnet/IP (10-Mar-2008)
The range of low profile multi-function Crompton Instruments Integra 1630 digital metering systems (DMS) from Tyco Electronics’ Energy Division has been expanded featuring a new model with Ethernet communication module supporting connection to SCADA systems using the BACnet/IP protocol (ANSI/ASHRAE 135 - 1995 Annex J).

Digital metering systems from Crompton Instruments (6-Mar-2008)
Multifunction DINtegra 1260 digital metering system from Crompton Instruments provides programmable measurement, display and communication of up to 50 major electrical and power quality parameters including true rms system values, total harmonic distortion and power quality data.

New version digital metering system available from Crompton Instruments (17-Aug-2007)
Crompton Instruments’ multifunctional Integra 1630 digital metering systems provide high accuracy 0.2% measurement, display and communication of all major electrical and power quality parameters including total harmonic distortion (THD) measurement up to the 31st harmonic.

New tape wound current transformers available from Crompton Instruments (16-Aug-2007)
The new DB series tape wound current transformers from Crompton Instruments are ring type with one metre flying leads suitable for primary currents from 60-2500A with 5A secondaries.

View all  |  RSS Feed

Related Articles

IEI Technology’s Intel Atom industrial computers from Soanar (5-Jan-2009)
The 45nm Intel Atom processor N270, available from Soanar, has a 1.60GHz clock speed and a 533MHz FSB with a 512KB L2 cache. The Intel Atom is interfaced through the 533MHz FSB to an Intel 945GSE graphics memory controller hub (GMCH), which is interfaced through a high-speed direct media interface (DMI) to an Intel Mobile ICH7-M I/O controller hub (ICH).

AverLogic Technologies demonstrate Power-line Digital Home solutions from Glyn High-Tech Distribution at CES 2009 (23-Dec-2008)
AverLogic Technologies, the video processing IC and specialty memory design company, will be presenting a live demonstration of their Power-line Digital Home along with comprehensive solutions, including ‘H.264 HD A/V streaming over Power-line’, ‘iPod and 192KHz Audio Streaming over Power-line’, and ‘IP Camera over Power-line’ at the CES 2009 show. AverLogic Technologies’ products are available from GLYN High-Tech Distribution.

Maxon Motor Australia’s medical business unit receives ISO 13485 certification (22-Dec-2008)
Maxon Motor Australia’s ‘Maxon medical’ business unit, which supplies high-precision microdrives smaller than 10mm diameters for the medical technology sector, has gained certification under the ISO 13485 medical standard on 11 December, confirming the high reliability and safety of all their microdrives.

Caterpillar of Australia launch reality show ‘KingGee Jack of all Trades’ (22-Dec-2008)
The Compact Construction Range from Caterpillar of Australia is set to debut on television’s main stage with the season launch of popular reality show ‘KingGee Jack Of All Trades’ in early January.