CrispTech launches new PoE industrial switch and splitter
PoE industrial switch and splitter
Increasing demands for PoE technology in industrial applications can now be met with a complete end-to-end solution from CrispTech.
PoE technology lets you eliminate the need for power outlets when deploying Ethernet-enabled devices. This means that VoIP phones, IP Cameras and other similar devices can be connected to the network and powered by a single Ethernet cable.
The Moxa EDS-P308 is an 8-port smart Ethernet switch that features PoE on ports 1 to 4, and supplies up to 15.4 watts of power per port.
By combining the network signal and device power in a single, twisted pair Ethernet cable connection, EDS-P308 provides economical deployment, increases mobility and simplifies wiring for network connections.
In addition a complementary PoE Splitter is also released.
The SPL-24 is an IEEE802.3af-compliant PoE splitter that distributes power to non-PoE devices.
Devices such as small PLCs and IO modules that have no Ethernet capability can be powered directly from the PoE Splitter which takes power from the PoE lines. Up to 12.94 watts per device can be supported.
The EDS-P308 and SPL-24 simplify wiring in the field and provides a more versatile environment for installing a wide range of Ethernet and non Ethernet devices.
- Huge savings in cost of wiring
- Simplifying the management of cables
- Providing power to inaccessible locations
- Use existing network points without the need to run extra power lines
EDS-P308 industrial 8-Port IEEE802.3af PoE unmanaged Ethernet switch product features:
- 4 IEEE802.3af-compliant PoE and Ethernet combo ports
- Intelligent power consumption detection and classification
- Redundant dual VDC power inputs
- Auto disconnection for over voltage or under voltage
- -40 to 75oC operating temperature range (T model)
Industrial IEEE 802.3af Power-over-Ethernet splitter product features:
- IEEE 802.3af compliant Split power/data from PoE equipment
- Supports output power up to 12.95 W at 24 VDC
- Short circuit protection for power output
- Auto disconnection for over voltage and under voltage for power input
- Operating temperature range from 0 to 60°C, or -40 to 75°C for “-T” models
- DIN-Rail ability
10-May-2007