Product Showcase
Hydraulic and Electrohydraulic Presses
Product/Service Name
Hydraulic and Electrohydraulic Presses from Swade-Sir International
Hydraulic and Electrohydraulic PressesThese Electrohydraulic Press are different from the Models to the right because of the use of a valve equipped with electromagnetic control and the addition of a two hands electrical interlock push button control, which allows semi-automatic and automatic operations, regulated by the end-stroke device.
Automatic Double Speed ElectroHydraulic Presses - with Plate-BendingModel No.164/RP - 100 Tonne
Model No.164/RPL - 100 Tonne
Model No.204/REP - 150 Tonne
Model No.204/RP - 150 Tonne
Model No.164/RPA - 100 Tonne
Model No.164/RPAL - 100 Tonne
Model No.204/REPA - 150 Tonne
Model No.204/RPA - 150 Tonne
Model No.164/RP,
Model No.164/RPL,
Model No.204/REP and
Model No.204/RP
FeaturesSemi-automatic, two speed Electrohydraulic bending presses equipped with normal equipment for press-bending plates up to 10mm thick and 1 mt. Wide. Special bending-die support for an easy assemblage of other kinds of equipment. (The disassembling of the normal equipment is extremely easy). Rapid hydraulic control with three-phase motor, 230-400, 50 Hz vane pump for rapid approach and return, axial pistons pump for working phase, pressure gauge and oil.
Manual valve with three positions (descent, neutral, return.) Pressure calibrating valve. End stroke electric device.
The presses are also configured to receive modular blades and forming dies to make the work easier.
The steel shaft is thickness treated and chrome plated.
The machines are equipped with two-hand control of the electrical interlock and with rear and side protective panels.