Universal Conditioning Module available from Control Devices
Control Devices , the regional distributor for Penny + Giles products, offer the new Universal Conditioning Module that provides reliable signal conditioning for a wide range of analogue inductive transducer types.
The Universal Conditioning Module can work with any manufacturer’s transducer and is suitable to drive 4, 5 or 6 wire differential LVDTs, ratiometric LVDTs and 3 wire inductive half bridge transducers (or RVDT equivalents).
The Universal Conditioning Module has a low current requirement of less than 10mA and can be linked and synchronised with up to 50 modules in one network for multiple channel measurement systems.
The Universal Conditioning Module provides a simple 0.5 to 4.5Vdc analogue signal output or by using additional module cards into a variety of different voltage ranges, a current output, or digital PWM output. It normally operates from an unregulated 10 - 30Vdc supply.
The set-up is flexible, allowing users to adjust excitation voltage and frequency, operating mode, span output and zero position, as well as configuration for multiple synchronisation.
The unit is housed in a rugged die-cast aluminium alloy housing, suitable for harsh environmental conditions and electrically noisy installations, with EMC Immunity to 100V/m.
The housing features an suitable environmental performance, with dust and fluid protection to IP68 and submersion to two meters.
The Universal Conditioning Module is simple and easy to install. It is designed to be mounted on a bulkhead close to the transducer by using M5 screws through the mounting holes that are located under the housing lid.
The supply, output and transducer connections are routed through two IP68 rated cable glands that can accommodate cable diameters of between three and eight millimetre.
11-Aug-2008