Product Showcase
Exair Super Air Knife for Quiet, Hard-Hitting Curtain of Air for Blowoff, Cleaning, Drying and Cooling
Product/Service Name
EXAIR Super Air Knife from Compressed Air Australia
What Is The Super Air Knife?EXAIR’s Super Air Knife is the latest generation of air knife that dramatically reduces compressed air usage and noise when compared to other blowoffs. The Super Air Knife offers a more efficient way to clean, dry or cool parts, webs or conveyors. It delivers a uniform sheet of laminar airflow across the entire length with hard-hitting force.
Noisy blowoffs become a whisper when replaced with the compact Super Air Knife. Even at high pressures of 80 PSIG (5.5 BAR), the sound level is surprisingly quiet at 69 dBA for most applications! Air amplification ratios (entrained air to compressed air) of 40:1 are produced. Meets OSHA maximum dead-ended pressure and noise requirements.
Drying: The laminar airflow of the Super Air Knife is perfect for removing moisture prior to packaging, painting, labelling, bar coding and assembly. Common applications include drying parts, rolled steel, circuit boards, webs, bottles, cans and more. Velocity is easily adjusted from a “blast” to a “breeze” with a pressure regulator.
Blowoff: The Super Air Knife is ideal for blowing off chips, dirt or water from parts, webs or conveyors. It delivers a uniform sheet of air that has the same force across the entire length. There are no interruptions or “dead spots”, which means all surfaces are dried or cleaned.
Cooling: Large volumes of airflow can be generated in very tight spaces due to the compact size of the Super Air Knife. Flow and force are easily controlled with a pressure regulator, allowing fast or gradual cooling. Shims can be installed if additional hard-hitting velocity is required.
Open, Float, Separate: The uniform airflow exits the Super Air Knife in a perfectly straight line (does not deflect). It is ideal for opening bags and pouches, floating webs, and keeping environments separate.
Smart Use Of Compressed Air
Almost every industrial facility has at least one compressor that is used for hundreds of different tools, equipment and operations. While most applications for compressed air present no real problems, some do. Improper use can translate into unnecessary energy costs, high noise levels and dangerous exposure of personnel to high pressure air.
Reduce Energy Costs: The best way to cut energy costs is through proper maintenance and use of the compressed air system. The most important factor to dramatically boost efficiency is proper use.
The Super Air Knife uses only 1/3 of the compressed air of typical blowoffs used in cleaning, cooling and drying operations and can be instantly cycled on and off.
Reduce Noise Levels: High noise levels are a common problem for many plants. The sound level of the Super Air Knife is quiet at 69 dBA, even at high pressures of 80 PSIG (5.5 BAR). Using the Super Air Knife, it is possible to obtain hard-hitting force without the high noise.
Eliminate Harmful Dead Ended Pressures: Air can be dangerous when the outlet pressure of a hole, hose or copper tube is higher than 30 PSIG (2 BAR). In the event the opening is blocked by a hand or other body part, air may enter the bloodstream through the skin, resulting in serious injury. The Super Air Knife has been engineered for safety and cannot be dead ended. It is safe to operate at higher pressures and meets OSHA standard 1910.242(b).
EXAIR’s Super Air Knife is available in lengths from 3” (76mm) up to 54” (1372mm) in aluminium, type 303 stainless steel and type 316 stainless steel (ss – for temperatures up to 427°C, food processing or corrosive environments). Special lengths and unlimited system lengths are also available.