Adjustable air amplifier from Compressed Air Australia (22-Aug-2008)
EXAIR’s new adjustable air amplifier from Compressed Air Australia offers a simple, low cost approach to move high volumes of air to cool, vent exhaust and dry.
Compressed Air Australia
GPO Box 2792
Darwin NT 0801
Tel: 1300 787 688; Int.: +61 8 8983 3999
Fax: 1300 787 637; Int.: +61 8 8983 3900
Supplier´s Website
Enquire now
Incorrect details?
GPO Box 2792
Darwin NT 0801
Tel: 1300 787 688; Int.: +61 8 8983 3999
Fax: 1300 787 637; Int.: +61 8 8983 3900
Supplier´s WebsiteEnquire now
Incorrect details?
EXAIR Cabinet Coolers – The Secret To Keeping Electronics Cool!
Product/Service Name
EXAIR Cabinet Coolers from Compressed Air Australia
Sound Familiar?
When hot weather causes the electronics inside a control cabinet to fail, there is a panic to get the machinery up and running again. The operator might choose to simply open the panel door and aim a fan at the circuit boards. In reality, the fan ends up blowing a lot of hot, humid, dirty air at the electronics and the cooling effect is minimal. If the machinery starts functioning again, the likelihood of repeated failure is great since the environment is still hot (and threatens permanent damage to the circuit boards). Worse yet, that open panel door is an OSHA violation that presents a shock hazard to personnel.
The Real Solution!
Stop electronic downtime! EXAIR has a complete line of low cost Cabinet Coolers. They mount in minutes through an ordinary electrical knockout and have no moving parts to wear out. Thermostat control to minimise compressed air use is available for all models. All Cabinet Coolers are UL Listed to US and Canadian safety standards.
NEMA 12 Cabinet Coolers
NEMA 12 Cabinet Coolers for large heat loads up to 5,600 Btu/hr. are ideal for PLC’s, line control cabinets, CCTV cameras, modular control centers, etc.
- Mounts top, side or bottom
- Enclosure remains dust-tight and oil-tight
NEMA 4 and 4X Cabinet Coolers
NEMA 4 and 4X Cabinet Coolers for large heat loads up to 5,600 Btu/hr. are ideal for PLC’s and modular controls.
- Enclosure remains dust-tight, oil-tight and splash resistant
- Suitable for wet locations where coolant spray or hose down can occur
- Ideal for indoor or outdoor service
Type 316 Stainless Steel Cabinet Coolers
Type 316 Stainless Steel Cabinet Coolers for NEMA 4X applications are available for heat loads up to 5,600 Btu/hr.
- Resists harsh environments not suitable for Type 303/304
- Ideal for food and chemical processing, pharmaceutical, foundries, heat treating and other corrosive environments
Mini NEMA 12, 4 and 4X Cabinet Coolers
The Mini NEMA 12, 4 and 4X Cabinet Coolers for small heat loads up to 550 Btu/hr. are ideal for control panels, relay boxes, laser housings and electronic scales.
- Measures 5” (127mm) high
- Mounts top, side or bottom
- Enclosure remains dust-tight and oil-tight (NEMA 12) and splash resistant (NEMA 4 and 4X)
High Temperature Cabinet Coolers
High Temperature Cabinet Coolers for NEMA 12, 4 and 4X applications are available for heat loads up to 5,600 Btu/hr.
- Suitable for ambients up to 93°C
- Ideal for mounting near ovens, furnaces, and other hot locations
Non-Hazardous Purge Cabinet Coolers
NHP Cabinet Coolers keep a slight positive pressure on the enclosure to keep dirt from entering through small holes or conduits.
- Uses only 1 SCFM in purge mode
- For heat loads up to 5,600 Btu/hr.
- NEMA 12, 4 and 4X
Contact Compressed Air Australia
More News
Compressed Air Australia News
Mini Reversible Drum Vac System from Compressed Air Australia (3-Jun-2008)
EXAIR’s new Mini Reversible Drum Vac System from Compressed Air Australia is a liquid vacuum, capable of vacuuming 20 litres of liquid in less than 10 seconds.
Exair’s side mount kits from Compressed Air Australia (18-Apr-2008)
Exair’s new side mount kits make the mounting of a NEMA 12 Cabinet Cooler possible, when an electrical enclosure has limited space on the top or side.
54” Super Air Knife for wide surface coverage from Compressed Air Australia (1-Apr-2008)
EXAIR’s new 54” (1372mm) Super Air Knife, available from Compressed Air Australia, produces a laminar sheet of airflow to blowoff, dry or cool wide surfaces.
Air nozzle available from Compressed Air Australia (28-Feb-2008)
Exair’s new Nano Super Air Nozzle has been engineered to produce high performance attainable from a tiny nozzle.
View all | RSS Feed 
Explore Similar Sections
[ View all ]
Ferret Newsletter
Be the first to know about new products and developments. Sign up for Ferret's daily newsletter.
About Ferretmore
- Contains over 8,000 manufacturing and industrial directory topics
- 250 new products are listed each week
- Supplies companies on average with 3000 leads and 55,000 website referrals each month
Access over 2000 Manufacturing and Operations jobs online!
More Products
Quiet, Hard-Hitting Curtain of Air for Blowoff, Cleaning, Drying and Cooling
EXAIR’s Super Air Knife is the latest generation of air knife that dramatically reduces compressed air usage and noise when compared to other blowoffs. ...
EXAIR Optimization Products to Minimise Compressed Air Use, Detect Wasteful Leaks, Monitor Compressed Air Usage and Detect Harmful Noise Levels
EXAIR’s EFC is a user-friendly electronic flow control for compressed air that is designed to minimise compressed air use on blowoff, drying, cooling, ...
