Cold Jet Australia provide dry ice blasting and dry ice cleaning solution for mould remediation. Cold Jet Australia dry ice blasting removes mould spores from wood completely. Dry ice blasting provides complete removal even in the tight angles of trusses, around nails, wiring and plumbing, without damage.
Dry ice blasting has the ability to reach tight and confined areas. Absence of sanding and scraping with no secondary waste streams has made Cold Jet Australia dry ice technology suitable for mould remediation projects.
The existence of mould in a building is the symptom of a problem with moisture. Eliminating the moisture problem assures that the mould will not return. Once the moisture problem is solved, mould remediation of the existing mould is important.
Mould can cause health problems and can damage the integrity of a building’s structure. So, removing the mould in its entirety is vital to any mould remediation project.
Cold Jet Australia provide a variety of essential nozzles and accessories to ensure complete spore removal from the multitudes of angles.
The traditional methods of sanding and scraping a mould infested attic can take up to six working days to complete an attic job. The Cold Jet Australia dry ice blasting solution can complete the attic job in two days.
Cold Jet Australia dry ice blasting is an alternative to the process of squeezing into tight corners to sand the mould off of wood trusses and joists.
With Cold Jet Australia dry ice blasting, the use of biocides and encapsulation can be reduced or eliminated. The registered pesticides were used as a back-up method to kill and could contain left over mould spores.
Dead mould is still allergenic and must be removed. Cold Jet removes all mould spores, so these chemicals are no longer needed.