This unique drillguard gives full operator protection from quill to drill-point by a smooth telescopic action which enables the guard to instantly self adjust as the drill penetrates the work-piece, returning to the fully extended positions when the spindle is raised.
Constructed from three independent aluminium extrusions with chip-breaking edges, the drillguard has twin scratch resistant, clear polycarbonate screens in both the middle and bottom sections. The versatility of the drillguard can be further enhanced by the instant removal of the bottom visor to suit those shorter length drills without any loss of vision; conversely the visor can be easily replaced to give an overall extended length of 265mm.
The outstanding feature of Model MT/RB drillguard is that it is fitted as standard with a clip type top fitting pre-bored to 88mm x 50mm. The customer turns the internal diameter to the non- rotating collar size required, splits the bush and clamps both bush and drillguard to the drilling machine.
The Model MT/RB drillguard is available from CPR Safe - Ind .