Home > Wiring connection socket testers

Wiring connection socket testers

Supplier News
article image The T7119 socket tester/RCD.

THE socket tester T7109 from CABAC is a test instrument for safe and fast indication of correct or incorrect socket or lead connection cable wiring.

In conjunction with the coding table, the four combined display elements provide a definite statement on the wiring condition and thus on the safety of sockets and connecting cables.

The instrument contact electrode functions in compliance with the principle of a phase tester, always referring to the ground potential.

A clear and safe indication of a GND-error via the LCD is available, in case dangerous contact voltage is present at GND (ground).

The socket tester T7119 is another test instrument for safe and fast indication of correct or incorrect socket or lead connection cable wiring.

This unit is also equipped with an additional RCD tester allowing the functioning of the RCD protection by means of a push-button. The nominal error current amounts to 30mA.

During the RCD test, current time is limited at the same time as the contact voltage is monitored. Thus maximum safety is ensured when using the socket tester.

In conjunction with the coding table, the five combined display elements indicate the true status of the wiring condition and thus the safety of sockets and connecting cables.

The instrument contact electrode functions in compliance with the principle of a phase tester, always referring to the ground potential, thus a clear and safe indication of a GND-error via the LCD is available in case dangerous contact voltage is present at GND (ground).

Features include:

· Provides a true ground error indication via the LCD.

· Enables speedy recognition of dangerous voltage being applied to the protective earth, thereby maximising safety.

· The use of three neon indicators provides rapid detection of correct/incorrect wiring including instant identification of fault indications.

· Designed for fast and effective testing of RCD's (T7119 only).

To test sockets - and lead connection wiring - simply plug the instrument into the socket. Touch the contact electrode and read the display elements. A statement regarding the test result is indicated via the coding on the front of the units.

Newsletter sign-up

The latest products and news delivered to your inbox