CapaNCDT 6100 displacement transducer from Bestech Australia (29-Aug-2008)
The CapaNCDT 6100, a precision non-contact capacitive displacement-measuring tool from Micro-Epsilon, is available in Australia and New Zealand from Bestech Australia.
Bestech Australia
PO Box 3184
Mentone (E) VIC 3194
Tel: 03 9584 1133
Fax: 03 9584 5477
Supplier´s Website
Enquire now
Incorrect details?
PO Box 3184
Mentone (E) VIC 3194
Tel: 03 9584 1133
Fax: 03 9584 5477
Supplier´s WebsiteEnquire now
Incorrect details?
Strain Gauges from Bestech Australia
Product/Service Name
Strain gauges are used to determine the stress in a structure by bonding them on the surface of the specimen and measuring the resultant change in its resistance. A wide range of strain gauges are available from Bestech for various applications.
-General purpose foil gauge for stress concentration, torque etc.
-Transducer strain gauges with creep compensation
-Waterproof gauge with coating of epoxy resin and integral lead wire
-Temperature integrated strain gauge with thermocouple
-Polyester backed foil strain gauges for metal, concrete and mortar
-Wood strain gauge for long term measurement on wood
-Metal backing strain gauge for concrete surface
-Magnetic field use strain gauge with twisted or shielded lead wire
-Mold strain gauge is embedded in concrete or mortar for loading test
-Asphalt strain gauge with waterproofing and heat resistance up to 200°C
-Composite material strain gauge
-Post-yield strain gauge for large strain measurement up to 20%
-Foil strain gauge for wood and gypsum, low elastic modulus materials
-Foil strain gauges for plastics, temperature compensated for acrylic or epoxy resin
-Foil strain gauge for cryogenic temperature usable to -196°C
-Foil strain gauge for high temperature to 300°C
-Weldable strain gauges installed by spot welding for high temperature to 800°C
-Bolt gauge is embedded in a pre-drilled hole of a bolt for axial strain measurement
-One-side gauge: Separated measurement of bending and axial strains of a plate
-Crack strain gauge to measure length of crack
-Semiconductor strain gauges for high gauge factor
Differentiating Features
-Simple construction with a small mass and volume so as not to interfere with the stresses on the specimen
-Small gauge length for evaluation of localized stress
-Good frequency response for tracking rapid fluctuations in stress
-Simultaneous measurement of multiple points and remote points
-Electrical output for easy data processing
Please contact Bestech for strain gauges, accessories, strain gauge transducers and data acquisition products.
Contact Bestech Australia
More News
Bestech Australia News
CapaNCDT 6100 displacement transducer from Bestech Australia (29-Aug-2008)
The CapaNCDT 6100, a precision non-contact capacitive displacement-measuring tool from Micro-Epsilon, is available in Australia and New Zealand from Bestech Australia.
AccuRange 4000 family of optical distance measuring sensors from Bestech Australia (26-Aug-2008)
Bestech Australia present the AccuRange 4000 family of optical distance measuring sensors from Acuity. With the ability to take measurements from zero to 54ft, the AccuRange 4000 family of optical distance measuring sensors operate by emitting a collimated laser beam that is reflected from the target surface and collected by the sensors.
LVDT series of linear inductive gauging sensors from Bestech Australia (22-Aug-2008)
Bestech Australia have offered the LVDT series of linear inductive gauging sensors from Micro-Epsilon. Accurate even under difficult ambient conditions and possessing long-term stability, the LVDT series is suitable for use in high precision applications.
ScanControl 2810 profile sensor from Bestech Australia (18-Aug-2008)
Bestech Australia’s ScanControl 2810, a high speed profile sensor from German company Micro-Epsilon, measures beading and grooves at speeds of up to 4kHz. Operating as a laser line scanner, the ScanControl 2810 uses the triangulation principle for the 2D acquisition of profiles on varied surfaces.
optoNCDT 2400 Confocal displacement measurement system from Bestech Australia (13-Aug-2008)
Bestech Australia offers optoNCDT 2400 to measure displacement with nanometer resolution. The sensor measurement ranges extend from 80µm to 24mm. This confocal displacement system can take distance measurements on glossy and transparent surfaces. It is also possible to measure the thickness of transparent films, plates or layers with only one sensor.
View all | RSS Feed 
Explore Similar Sections
[ View all ]
Ferret Newsletter
Be the first to know about new products and developments. Sign up for Ferret's daily newsletter.
About Ferretmore
- Contains over 8,000 manufacturing and industrial directory topics
- 250 new products are listed each week
- Supplies companies on average with 3000 leads and 55,000 website referrals each month
Access over 2000 Manufacturing and Operations jobs online!
More Products
Displacement Measurement from Bestech Australia
Laser Displacement Sensors: • Range of < mm to 3km • Non contact • Long reference distances ...
