Bestech Australia presents the GM62 SG amplifier from Lorenz, Germany. This DIN rail mountable measuring amplifier has two parallel sensor connections. These SG signals are amplified to a standard output signal of 0 up to ±10 V.
A galvanically separated supply voltage range of 10 up to 30 V and the analog output of 0 up to ±10 V allows for direct signal processing with a PLC-control.
Features of the GM62 SG amplifiers:
- The adaption of the sensor sensitivity takes place on site by a DIL-switch. Preloads (tare) can be adjusted. The control switch can be activated via an external control signal or via the control key on the front.
- Interference signals and transient effects of the measurement signals can be alleviated by the input filter. Sensor excitation is 6...10 V adjustable.
- The slim-line housing of the amplifiers is only 23mm wide. This allows for space-saving assembly in switch-cabinets close to the sensors on standardised DIN mounting rails. All control elements are accessible from the front behind a hinged plexiglass pane.
- The adjustment of amplification, zero point and filter is possible by potentiometers.