Package Integrity Tester

Got a Question for Bestech Australia?

Bestech Australia presents the TSE6086 Package Integrity Tester, from Seal Tick. This system has been designed and developed by Bestech Australia to enable the testing of seals in food and pharmaceutical packages. It ensures the seals have been made completely, allowing the manufacturer to be confident about shelf life and the integrity of the product, whilst offering a system of quality traceability.

The TSE6086 package integrity tester accepts a wide range of pack sizes and shapes without the need for adjustment. The tests can be as short as 5 seconds for small packs, and check for protection against moisture, oxygen and biological contamination. The tests do not stress or inflate the package, are dry and non-destructive, allowing the product to go back onto the production line. Results are both quantitative and operator independent. The SealTick package testing system is easy to use and very reliable.

Requiring only compressed air and 240V mains power, the seal tester is switched on, the handle is opened, and it is ready to test. The test results are shown as either a Pass, Fine Fail or Coarse Fail. The stainless steel construction ensures the package integrity tester’s durability in a production environment. A quantitative result is written into the internal log, and can be uploaded into a computer or network for quality traceability. Different products can be selected on the controller and tested using product specific test procedures.

24/06/2009 12:00 AM

Got a question about this product

More information about this product

Contact Details

Send to a friend

Contact Bestech Australia

By sending this enquiry you will also be informed of other related opportunities.

First Name

Surname

* Your Name

So the supplier can address you personally

Phone

Will only be sent to the supplier, no one else

* Your Email

Will only be sent to the supplier, no one else

State

So you get the most relevant information

Personal Message

No Yes

Be the first to know about new products, services and developments. Send me Ferret's newsletter.

* does not match

Send Enquiry

More products from Bestech Australia

Pressure Sensors from Bestech

Pressure Sensors Bestech Australia has a wide range of pressure sensors available, from general purpose types to specific application sensors. These include: General purpose gauge pressure, sealed gauge pressure, ...

Enquire Now

Displacement Measurement from Bestech Australia

Laser Displacement Sensors Range of < mm to 3km Non contact Long reference distances High resolution and excellent linearity High measuring frequency ...

Enquire Now

Strain Gauges from Bestech Australia

General purpose foil gauge for stress concentration, torque etc. Transducer strain gauges with creep compensation Waterproof gauge with coating of epoxy resin and integral lead wire Temperature integrated ...

Enquire Now

Force Sensors and Load Cells from Bestech Australia

Bestech Australia holds a large range of products for the measurement of force and load. A variety of capacities and constructions for every application are available, and special applications can be discussed with the ...

Enquire Now

News sign up

Additional Bestech Australia News

Digital panel meters from Bestech Australia

Digital panel meter from Bestech Australia (26/11/2009)

Bestech Australia presents the A8000 series of digital panel meters, from Asahi Keiki, Japan.

AR700 laser distance gauge now available from Bestech Australia (23/11/2009)

Bestech Australia introduces the Acuity AR700 Laser Distance Gauge, an integrated triangulation sensor.

The Lorenz DR-2112/DR-2412 torque cells (18/11/2009)

These torque cells have male drives to enable the transducer to be located correctly. A speed/ angle sensor is also integrated in the torque dynamometer.

Miniature strain gauges from Bestech Australia

Miniature strain gauges available from Bestech Australia (11/11/2009)

TML now has a large range of miniature strain gauges for such applications, which are available at Bestech Australia.

Micro-Epsilon’s optoNCDT 2000 laser-optical displacement sensor -dimensional and vacuum testing of cans, jars and bottles (6/11/2009)

Micro-Epsilon’s optoNCDT 2000 laser-optical displacement sensor, available from Bestech Australia, can measure such dimensions to high accuracy, and therefore could be used to avoid such costs.

Displacement measurement system with sub-nanometre resolution (3/11/2009)

Bestech Australia now has a new system for measuring distances and displacements down to 70 picometres – approximately the amount of grass growth in one millisecond.

Miniature pressure transducers from Bestech Australia

High temperature miniature pressure transducer from Bestech Australia (2/11/2009)

The XPCM10, from Bestech Australia, is a miniature pressure transducer designed for use in temperatures of up to 220°C.

Draw-wire sensors for the testing of wind turbine rotor blades (29/10/2009)

Micro-Epsilon’s draw-wire position sensors, which are available from Bestech Australia, are being used in the testing of wind turbine rotor blades at the new Fraunhofer Institute for Wind Energy and Energy System Technology ...

MEMS piezoresistive accelerometer available from Bestech Australia (23/10/2009)

Bestech Australia presents the model 1500 MEMS piezoresistive accelerometer, from VIP Sensors.

Micromanometer for pressure and flow measurements available from Bestech Australia (20/10/2009)

The Furness FCO510 Micromanometer, available from Bestech Australia, is a microprocessor-based precision measuring instrument for ultra-low-range differential pressures.

Hydraulic Level Transmitters available from Bestech Australia (12/10/2009)

Bestech Australia supply Model LV38 Hydraulic Level Transmitters by BCM Sensors for flange installation.

High accuracy gravity-referenced inclinometers from Bestech Australia (9/10/2009)

Bestech Australia presents the Sherborne Schaevitz LSOC/LSOP ‘L’ DC-operated, gravity-referenced servo inclinometers, suitable for various applications.

Profile scanners with new measuring range from Bestech Australia (6/10/2009)

Bestech Australia’s range of compact profile scanners, from German manufacturer Micro-Epsilon, has been extended to include a new version.

Electronic barometer and pressure transmitter from Bestech Australia (30/09/2009)

Bestech Australia presents the AD 1000/BA 1000 electronic barometer, from Halstrup. This barometer displays highly accurate and stable readings of absolute pressure (AD 1000) or barometric pressure

New MEMS Low Noise Gyroscope from Bestech Australia (29/09/2009)

The G50Z-LN is a single axis MEMS rate sensor with low noise – typically about 0.007°/sec/vHz

Compact Static torque transducer from Bestech Australia (28/09/2009)

Bestech Australia presents the DF30 series of static torque transducers, from Lorenz

Multi-channel signal conditioner for thermocouples (25/09/2009)

Bestech Australia presents the 28208 signal conditioning module, from Precision Filters.

Inspection of bearing shell presence at Volvo using optical micrometers (22/09/2009)

Bestech’s range of optical micrometers, from Micro-Epsilon, are being used during engine production at Volvo in Sweden.

Miniature flush diaphragm pressure transducers from Bestech Australia (18/09/2009)

Bestech Australia presents the series 8111/8112 miniature pressure transducers, from Burster.

High precision, long range draw wire sensors from Bestech Australia (16/09/2009)

Bestech Australia presents series P200 long range draw wire sensors, from Micro-Epsilon, Germany.

Handheld infrared temperature sensor (9/09/2009)

Bestech Australia presents the thermoMETER MS (MiniSight) intelligent universal infrared thermometer

Universal materials testing machine from Bestech Australia (4/09/2009)

Technical and Scientific Equipment (TSE) present the EZ50 twin column, bench mounted materials testing machine.

High sensitivity speed sensors from Bestech Australia (3/09/2009)

Bestech Australia presents the series 89100 speed sensors from Burster. These sensors can measure straight line speeds to an accuracy of 1% and find use in many applications.

Replacement LVDTs for power generation industry (28/08/2009)

Bestech Australia can announce that it now supplies exact replacement Power Generation LVDTs, from Macrosensors, that match other manufacturer designs, but at a lower cost and with greater availability.

Micro-Epsilon’s WDS-P60 series draw-wire sensors available from Bestech Australia (25/08/2009)

Pipelines in power stations often experience constant extreme pressures and temperatures, commonly withstanding 300 bar of pressure and temperatures up to 620°C.

Multi-functional display with integrated data logger (24/08/2009)

Bestech Australia introduces a new multi-functional display with integrated data logger, from Ahlborn, Germany.

Bestech Australia presents the DIGIFORCE 9306 universal test system (13/08/2009)

This press-fit controller controls processes in which precisely defined functional relationships between two measurement variables must be demonstrated.

Load cell for hand or pneumatic operated press (12/08/2009)

Bestech Australia presents the model 8451 load cell for a hand or pneumatic operated press, from Burster.

The optoNCDT 1402 compact laser displacement sensor (11/08/2009)

Bestech Australia presents the optoNCDT 1402 compact laser displacement sensor, from Micro-Epsilon, Germany. This laser sensor makes displacement, distance and position measurements with its integrat

Intelligent digital manometer for pressure measurement (10/08/2009)

Bestech Australia presents the LEO 3 digital manometer, from Keller, Germany.

Simultaneous thermal analysis (4/08/2009)

The Netzsch STA449 F1 and F3 simultaneous thermal analysis systems have achieved new levels of simplicity in operation.

Actuator for positioning gears (3/08/2009)

Bestech Australia presents the ST 120 KG actuator, from Halstrup-Walcher, Germany. This actuator is cased in an ABS housing and consists of a gear unit with synchronous or DC motor with a limit on the

Compact Laser Displacement Sensor (30/07/2009)

Bestech Australia presents the optoNCDT 1402 compact laser displacement sensor, from Micro-Epsilon, Germany.

High Precision LVDT Gauging Probes from Bestech (29/07/2009)

Bestech Australia presents Macrosensor’s BBP 315 series high precision LVDT gauging probes, a family of 8mm diameter pencil-type gauging probes which offer ultra-precise measurement of dimensions in a

Displacement measurement sensors from Bestech Australia (27/07/2009)

Bestech Australia presents the new optoNCDT 2403 confocal chromatic displacement measurement sensors, from Micro-Epsilon, Germany.

Sound Level Meter now available from Bestech (24/07/2009)

Bestech Australia introduces a new sound level meter, from Ahlborn, Germany.

Real-time thermography with miniature design from Bestech (23/07/2009)

Bestech Australia presents the thermoIMAGER TIM, a new infrared camera from Micro-Epsilon. The camera, which can be used in a fixed position, has a very robust construction and is currently one of the

Customer-specific eddy current displacement sensors for OEMs, available from Bestech (17/07/2009)

Bestech Australia introduces a flexible new range of eddy current displacement sensors for OEM applications, from Micro-Epsilon.

Turbocharger Speed Sensors from Bestech Australia (16/07/2009)

Bestech Australia recently launched a new range of turbocharger speed sensors for high volume production, from Micro-Epsilon.

AlgaeTorch for algae and chlorophyll reading, by Bestech (15/07/2009)

The AlgaeTorch is a light-weight, outdoor instrument for the quantification of blue-green algae and total chlorophyll. It allows for the rapid measurement of toxic algae in water used for drinking and

Dielectric Analyser for In-Process testing, available from Bestech (14/07/2009)

Technical and Scientific Equipment (TSE) presents the DEA 230 Dielectric Analyser,available from Bestech. This dielectric analyser can be used for investigation of the curing behaviour of thermosettin

High performance GPS-aided attitude and heading reference system by Bestech (13/07/2009)

Bestech Australia introduces the new MEMS LandMarkTM 30 GPS/AHRS, from Gladiator Technologies. This is a high performance integrated GPS-aided Attitude and Heading Reference System (AHRS), up to a ful

Solid state switch system by Bestech (9/07/2009)

Bestech Australia presents the 464kB Solid State Switch System, from Precision Filters. This system is a 3-stage non-blocking solid state switching system which can provide the equivalent of a 256 x 2

Digital humidity transmitter (7/07/2009)

Bestech Australia presents the Digital humidity transmitter Type MH8D46, from Ahlborn, Germany.

High Performance MEMS Accelerometer by Bestech (7/07/2009)

Bestech Australia presents the all new A35 MEMS high performance accelerometer, from Gladiator Technologies. This accelerometer offers excellent bias in a small, light weight package that uses low pow

Water-cooled pressure transducer for measurement at up to 350°C (6/07/2009)

Bestech Australia presents a water-cooled piezoresistive pressure transducer, from Keller. This pressure transducer can be used for accurate static and dynamic measurements in fluids up to 350°C.

High accuracy pressure switch from Bestech Australia (2/07/2009)

Bestech Australia presents the dV-2 PS pressure switch, from Keller. This model is a digital manometer with two independent pressure switch outputs.

Thread Friction Sensor from Bestech Australia (29/06/2009)

Bestech Australia presents the M-2230 thread friction sensor, from Lorenz. This sensor measures the pre load, friction torque underneath the screw head and thread friction torque.

21 Y pressure transmitters for industrial applications from Bestech Australia (23/06/2009)

Bestech Australia present the series 21 Y pressure transmitters from Keller. The series 21 Y pressure transmitters are piezoresistive pressure transmitters, which have a small temperature error. This

Lorenz M-2230 thread friction sensors available from Bestech Australia (22/06/2009)

Bestech Australia offer the M-2230 thread friction sensor from Lorenz. This sensor measures the pre load and friction torque underneath the screw head and thread friction torque.

High-Speed Laser Profile Sensors from Bestech Australia (19/06/2009)

Bestech Australia Pty Ltd supplies laser profile sensors in Australia and New Zealand. Their laser profile sensors incorporate triangulation principle and are used for measurements on beads or grooves.

Micro-Epsilon induNCDT IWS inductive displacement sensors available from Bestech Australia (17/06/2009)

Bestech Australia offer induNCDT IWS inductive displacement sensor, from Micro-Epsilon. It is designed for non-contact displacement and distance measurements against ferromagnetic materials.

Eddy current displacement sensor system (16/06/2009)

Bestech Australia introduces an extreme high resolution eddy-current sensor, from Micro-Epsilon, Germany.

Thermocouple Transducer (10/06/2009)

Bestech Australia presents the Model TZ-5CA terminal type thermocouple transducer.

AC Signal Converter from Bestech Australia (9/06/2009)

Bestech Australia presents the TZ-1DA AC signal isolation transducer, from Asahi Keiki, Japan

A2 heavy duty sensor signal conditioners available from Bestech Australia (8/06/2009)

Bestech Australia present the model A2 heavy duty sensor signal conditioner from BCM Sensors. This signal conditioner is suitable for any sensor or transducer, which uses a Wheatstone bridge strain ga

Lorenz DZ-1 stress sensors available from Bestech Australia (5/06/2009)

Bestech Australia have introduced the DZ-1 stress sensor from Lorenz. This sensor can be used for weight and level control, for press-in force control and for control of material stress. The sensor is easy to assemble at ...

Bestech Australia offers TD70 Torque Sensor (3/06/2009)

Bestech Australia supplies TD70 Torque Sensor, which is manufactured by ME Systeme, for measurement of reaction moment.

Technical and Scientific Equipment TMA 402 vertical thermo-mechanical analysers available from Bestech Australia (1/06/2009)

Technical and Scientific Equipment (TSE) present the TMA 402 vertical thermo-mechanical analyser, from Netzsch, Germany. The TMA 402 Vertical thermo-mechanical analyser, available from Bestech Austral

TML’s KPC-PA/KPD-PA and KPA-PA/KPB-PA pore pressure gauges available from Bestech Australia (28/05/2009)

Bestech Australia offer the KP series of pore pressure gauges, from TML, Japan. These devices are used to measure pore water pressure in ground, sheet piles, piles and boreholes. The KPA-PA pore press

VIP Sensors’ Smart Sensors network systems available from Bestech Australia (26/05/2009)

Bestech Australia offer the Smart Sensors network system from VIP Sensors. The Smart Sensors network system is a distributed sensor instrumentation system with synchronous/simultaneous sampling consis

Halstrup-Walcher P26 differential pressure transmitter with scalable range available from Bestech Australia (25/05/2009)

Bestech Australia present the P26 differential pressure transmitter, from Halstrup-Walcher. In addition to differential pressure data, this pressure transducer also records positive and negative overpressures. Measurement ...

Micro-Epsilon’s BR 400 calibration sources available from Bestech Australia (22/05/2009)

Bestech Australia offer the BR 400 calibration source from Micro-Epsilon. It allows users to accurately check the calibration of temperature sensors in the field or laboratory.

Halstrup-Walcher’s P26 differential pressure transmitters available from Bestech Australia (20/05/2009)

Bestech Australia offer P26 differential pressure transmitter, from Halstrup-Walcher. In addition to differential pressure data, the P26 differential pressure transmitter/ transducer records positive

DR-2112/DR-2412 Torque Cell from Lorenz (19/05/2009)

Bestech Australia presents the DR-2112/DR-2412 torque cell, from Lorenz. Both these sensors have a contactless and digital signal transmission from shaft to case, which means no transmission failure and zero maintenance ...

Positioning system for auxiliary and positioning axes available from Bestech Australia (15/05/2009)

Bestech Australia present the PSE 37_/39_-14 positioning system, from Halstrup-Walcher, Germany. The PSE 37_/39_-14 positioning system is a compact and complete solution for positioning auxiliary and

Remote Data Transmission Unit and Data Logger from Bestech Australia (14/05/2009)

TSE presents the GSM-2 remote data transmission unit and data logger, from Keller. It integrates a GSM unit and sends the logged data by email or SMS.

Furness Controls’ FCO732 flow meters available from Bestech Australia (8/05/2009)

Bestech Australia offer the FCO732 flow meter, from Furness Controls. The FCO732 is a production line flow meter that is used to test a variety of components including exhaust systems, laser drillings

TML LTA-NA torque transducers available from Bestech Australia (7/05/2009)

Bestech Australia offer the LTA-NA torque transducer from TML, Japan. The LTA-NA torque transducer is a high precision transducer that is used to measure tightening force on nuts and bolts. Compact an

Macrosensors subsea/marine series of LVDT position transmitters available from Bestech Australia (6/05/2009)

Bestech Australia offer the subsea/marine series custom submersible LVDT position transmitters, from Macrosensors. These transmitters are high-pressure and seawater-resistant LVDT-based linear positio

Micro-Epsilon PI infrared imager for thermal imaging available from Bestech Australia (5/05/2009)

Bestech Australia present the Micro-Epsilon PI (process imager), with USB 2.0 Interface for online applications. This infrared imager is a full radiometric thermographic device, showing temperature images and profiles of ...

TAD II threshold angle detectors available from Bestech Australia (4/05/2009)

Bestech Australia present the TAD II threshold angle detector, from Spectron Systems Technology. The TAD II threshold angle detector is a dual axis tilt sensor, which functions as an electronic switch.

Measuring amplifier with data logger available from Bestech Australia (29/04/2009)

Technical and Scientific Equipment have presented the GM 80-PA measuring amplifier with data logger, from Lorenz Messtechnik. The GM 80-PA measuring amplifier processes strain gauge signals of 0.35 mV/V to 3.3mV/V and active ...

VIP Sensors’ 2015A piezoelectric accelerometers available from Bestech Australia (28/04/2009)

Bestech Australia offer model 2015A piezoelectric accelerometer, from VIP Sensors. The 2015A piezoelectric accelerometer features integral electronics (IEPE), and has a stud mounted design for general

Chatillon DFX series digital force gauges available from Bestech Australia (22/04/2009)

Bestech Australia offer the DFX series digital force gauge from Chatillon. This digital force gauge is suitable for applications where users are interested in basic peak force measurement. It is available in four different ...

Technical and Scientific Equipment’s EMA 200 digital manometers/pressure gauges available from Bestech Australia (21/04/2009)

Technical and Scientific Equipment (TSE) offer the EMA 200 digital manometer from Halstrup Walcher. The EMA 200 digital manometer is available from Bestech Australia. It is a battery-operated, digital

D214NE digital display device for digital sensors available from Bestech Australia (16/04/2009)

Bestech Australia present the DD214NE display device for digital sensors. This model is for two digital sensor signals, and the display has several integral counting functions.

Nohken CG capacitance point level sensors available from Bestech Australia (9/04/2009)

Bestech Australia offer CG capacitance point level sensor, from Nohken, Japan. The CG capacitance point level sensor provides simple and cost effective point level detection of liquids, solids, and adhesive conductive media. ...

ME Systeme KD24S force sensors available from Bestech Australia (8/04/2009)

Bestech Australia offer the KD24S force sensor, from ME Systeme. This S-shaped load cell is compact and is suitable for testing tasks in quality assurance as well as in materials testing. The KD24S force sensor is built ...

Ahlborn ALMEMO 5790 recording and measurement systems for harsh environments available from Bestech Australia (6/04/2009)

Ahlborn ALMEMO 5790 recording and measurement systems are available from Bestech Australia. ALMEMOs are portable and stationary measuring instruments, data loggers, data acquisition systems with PC interface and servers.

464kB Solid State Switch System available from Bestech Australia (3/04/2009)

Bestech Australia present the 464kB Solid State Switch System, from Precision Filters.

Optocontrol 2600 high speed LED micrometers available from Bestech Australia (30/03/2009)

Bestech Australia offer the Optocontrol 2600 high speed LED micrometer, from Micro-Epsilon, Germany. It is a measurement system with an integral high resolution CCD camera for geometrical measurements

Macrosensors’ LVC 2500 LVDT signal conditioners available from Bestech Australia (24/03/2009)

Bestech Australia offer the LVC 2500 LVDT signal conditioner, from Macrosensors, USA. This is a single channel signal conditioner that operates on 10 to 30 volts DC power to support standard LVDT, RVDT, and VRT half-bridge ...

Keller’s 33X and 35X high precision pressure transmitters available from Bestech Australia (23/03/2009)

Bestech Australia offer the series 33X and 35X high precision pressure transmitters from Keller.

Spectron Systems Technology’s SSY0091P dual axis inclinometers available from Bestech Australia (18/03/2009)

Bestech Australia offer the SSY0091P dual axis inclinometer, from Spectron Systems Technology. The SSY0091P dual axis inclinometer combines the SP 5000 series sensor with CMOS signal conditioning circuitry. The result is ...

Micro-Epsilon capaNCDT 6350 capacitive displacement sensor systems available from Bestech Australia (2/03/2009)

Bestech Australia present the capaNCDT 6350 high-speed capacitive displacement sensor system from Micro-Epsilon. The capaNCDT 6350 is a compact, single-channel system that comprises a capacitive displ

Smart Sensor Network System model 6003 available from Bestech Australia (24/02/2009)

Bestech Australia present the model 6003 Smart Sensor Network System, from VIP sensors. The smart sensor network system overcomes the problem of interconnecting cables used in traditional measurement

Micro-Epsilon eddyNCDT 3300 displacement sensors available from Bestech Australia (23/02/2009)

Bestech Australia offer the eddyNCDT 3300 high precision eddy current displacement sensor, from Micro-Epsilon, Germany. Eddy current sensors from Micro-Epsilon are used in applications where harsh ambient conditions are ...

Centre-hole type compression load cell available from Bestech Australia (19/02/2009)

Bestech Australia present the KCE-NA centre-hole type load cell from TML. The KCE-NA centre-hole type load cell is specifically designed for use in tension measurement of rods and strands in various a

Centre-hole type compression load cell available from Bestech Australia (19/02/2009)

TML F-series strain gauges available from Bestech Australia (13/02/2009)

Bestech Australia have introduced F-series strain gauges from TML. These strain gauges are used for physical force measurements in mechanical, marine, aircraft and civil engineering and in fields of a

ME Systeme DA40, DA54 and DAdX strain sensors available from Bestech Australia (12/02/2009)

Bestech Australia provide DA40/DA54/DAdx strain sensors from ME Systeme. These strain sensors are used for high-resolution acquisition of forces and deformations on large components, for example, presse

Macrosensors’ GHS series LVDT-based gauging probes available from Bestech Australia (11/02/2009)

In hostile environments, such as the shop floor, gauging probes can encounter serious problems. For example, the zero-clearance linear ball bearing must be protected from the slightest contamination or it jams up and fails. ...

Asahi Keiki’s AMH-762 digital panel meters available from Bestech Australia (4/02/2009)

Bestech Australia offer the AMH-762 digital panel meter, from Asahi Keiki. This model is a setpoint comparator and has high conversion rates of up to 4000 times/second.

DC-LVDT position sensors available from Bestech Australia (4/02/2009)

Bestech Australia present the DC750 series of DC-operated LVDTs from Macrosensors. These LVDTs (linear variable differential transformers) are designed for a wide range of position measurement applications.

Long-stroke displacement sensors available from Bestech Australia (3/02/2009)

Bestech Australia present the EDS series of sensors, from Micro-Epsilon, Germany. These are long-stroke sensors designed for industrial use in hydraulic and pneumatic cylinders for the displacement and position measurement ...

BCM Sensors 6918/6998 universal load cells available from Bestech Australia (29/01/2009)

Bestech Australia offer the 6918/6998 universal load cells from BCM Sensors. These load cells are manufactured using advanced metal foil strain gauge technology.

AccuGauge AG200 digital pressure gauge available from Bestech Australia (28/01/2009)

Bestech Australia present the AccuGauge AG200 digital pressure gauge from American Sensor Technologies. The AccuGauge AG200 is a media-isolated digital pressure gauge that offers a 4 to 20mA output signal with a large LCD ...

Bestech Australia introduce metal foil and semiconductor strain gauges (21/01/2009)

Bestech Australia have introduced a range of strain gauges from BCM. These strain gauges are designed and manufactured for both transducer applications and for stress analysis. Bestech Australia offer metal foil and semiconductor ...

AR200 displacement sensors available from Bestech Australia (20/01/2009)

Bestech Australia offer the AR200 group of laser displacement sensors from Acuity Laser Measurement. This range of sensors includes four measuring ranges, with better resolution and sensitivity.

5000 model wet differential pressure sensor available from Bestech Australia (19/01/2009)

Bestech Australia offer the model 5000 wet/wet differential pressure sensor from American Sensor Technologies.

Single ended shear beam load cell available from Bestech Australia (6/01/2009)

Bestech Australia have presented the model 3417/3497 single ended shear beam load cell from BCM Sensors. These are low-profile, high precision load cells based on the shear-beam working principle.

AST20HA digitally compensated pressure transducer/pressure transmitter available from Bestech Australia (22/12/2008)

Bestech Australia present the AST20HA digitally compensated pressure transducer/pressure transmitter from American Sensor Technologies.

Silicon Designs’ 3320 G-Logger remote acceleration acquisition system available from Bestech Australia (17/12/2008)

Bestech Australia offer the model 3320 G-Logger remote acceleration acquisition system from Silicon Designs.

Optris LS infrared thermometer available from Bestech Australia (10/12/2008)

Bestech Australia have launched the Optris LS (LaserSight) infrared thermometer that supports the professional non-contact temperature measurement of objects as small as 1mm in a temperature range between -35°C to 900°C.

1312 and 1392 models of shear-web load cells available from Bestech Australia (10/12/2008)

Bestech Australia offer the model 1312/1392 shear-web tension/ compression load cells from BCM Sensor. These are alloy steel (1312) and stainless steel (1392) load cells with protection up to an IP66 standard. The 1312 is ...

FN7080 Gear Stick load cell available from Bestech Australia (8/12/2008)

Bestech Australia have launched the FN7080 Gear Stick load cell from FGP Instrumentation. This load cell is a strain gauge device, which is installed in place of the original gear knob on the gear stick of a vehicle to measure ...

Acuity’s AR700 RP sensor available from Bestech Australia (28/11/2008)

Surface profiling is an important part of road and pavement engineering. Road profiling systems are developed to collect real-time continuous high-speed measurements of longitudinal profiles of road surfaces.

MultiNCDT measurement systems use eddy-current sensor to measure surface contour of the roller

MultiNCDT measurement systems for roundness and ovality available from Bestech Australia (27/11/2008)

The multiNCDT measurement systems, from Micro-Epsilon and available from Bestech Australia, are suitable to measure roundness or ovality. These are eddy-current displacement sensors which measure the surface contour of the ...

MultiNCDT measurement systems, from Micro-Epsilon and available from Bestech Australia (26/11/2008)

Eddy-current displacement sensors which measure the surface contour of the roller.

MK120 model is an OEM low-cost draw-wire sensor and offers a measuring range of up to 7.5m.

Low Cost Long Range Draw Wire Sensor (24/11/2008)

Bestech Australia introduces the latest draw-wire sensor MK120 from measurement technology manufacturer Micro-Epsilon, Germany.

SPECTROTILT 4-20mA Electronic Inclinometer; Bestech's single axis tilt sensor

Bestech Australia presents the SPECTROTILT 4-20mA Electronic Inclinometer (21/11/2008)

A fully signal conditioned, single axis tilt sensor, SPECTROTILT is a combination of a proprietary glass/ceramic hybrid electrolytic tilt sensor and custom electronics.

Spot Welder W-50R available from Bestech Australia (21/11/2008)

Bestech Australia have presented the Spot Welder W-50R from TML, a capacitive discharge spot welder that is compact and lightweight. This unit is used to mount weldable strain gauges to structures and to secure lead wires ...

Macrosensors’ LP 750 frictionless position sensors available from Bestech Australia (18/11/2008)

Bestech Australia offer the LP750 series of frictionless position sensors from Macrosensors. These frictionless position sensors, an alternative to potentiometer replacement sensors, are designed for a range of position ...

Gladiator Technologies’ LandMark20 MEMS GPS/AHRS Attitude and Heading Reference system available from Bestech Australia (17/11/2008)

Bestech Australia offer the LandMark20 MEMS GPS/AHRS from Gladiator Technologies. It is an Attitude and Heading Reference System (AHRS) that provides internally temperature compensated RS485 output of delta velocity, delta ...

FGP Sensors and Instrumentation’s XFTC300 series of miniature load cells available from Bestech Australia (13/11/2008)

Bestech Australia offer the XFTC300 series of miniature load cells, from FGP Sensors and Instrumentation. The XFTC300 series of miniature load cells is developed to measure tension and/or compression in static and dynamic ...

Nohken R7-X miniature rotating paddle bin level sensors available from Bestech Australia (12/11/2008)

Bestech Australia Nohken R7-X miniature rotating paddle bin level sensor is designed for solid level detection, for use with plastic moulding or injection machines and extruders. It can also be designed into equipment such ...

Micro Epsilon's Eddy-current displacement sensor DT3010 available from Bestech Australia (6/11/2008)

Bestech Australia introduces the eddy-current displacement sensor DT3010 from Micro-Epsilon. This series is a non-contacting displacement measuring system based on the eddy current principle.

The Micro-Epsilon’s optoNCDT 2200 laser-optical displacement sensor

Micro-Epsilon’s laser-optical displacement sensor available from Bestech Australia (31/10/2008)

It is of prime importance in the food industry that prefabricated cans and can-lids are dimensionally accurate. This is in order to ensure proper matching of lids and cans and therefore the formation of a permanent airtight ...

FA100-A1 series high performance accelerometer available from Bestech Australia (31/10/2008)

Bestech Australia offer the FA100-A1 series high performance accelerometer from FGP Sensors and Instrumentation. It is designed for a wide range of complex applications including guidance, tilt sensing and vibration testing.

AW series of high temperature weldable strain gauges available from Bestech Australia (29/10/2008)

Bestech Australia offer the AW series of high temperature weldable strain gauges from TML, Japan. These strain gauges are fully encapsulated in a corrosion-resisting metal tube for use in various environments, including ...

Bestech Australia introduce ASCOspeed 5500 high accuracy non contact speed sensor (24/10/2008)

Bestech Australia introduce the ASCOspeed 5500 novel speed sensor for metal industry from Micro-Epsilon, Germany. This speed sensor has applications in rolling mills, straightening lines, inspection and coating lines, cutting ...

The scanCONTROL 2700/ 2710 laser-line profile sensor available from Bestech Australia (16/10/2008)

Bestech Australia provide the scanCONTROL 2700/ 2710 laser line profile sensor from Micro-Epsilon, Germany. This laser line profile sensor can acquire profiles of the most varied target surfaces. Consisting of a compact ...

Electrolytic tilt sensors from Bestech Australia (14/10/2008)

Bestech Australia present the L Series of electrolytic tilt or angle sensors from Spectron Glass and Electronics. These sensors are suitable for high accuracy or wide angular range measurements.

Melt pressure transducers from Bestech Australia (13/10/2008)

Bestech Australia have introduced a range of melt pressure and temperature transducers, developed from strain gauge technology and with optimal price/ performance ratio.

The Optris CT laser infrared thermometer for temperature measurement from -40°C to 975°C

Optris CT laser infrared thermometer from Bestech Australia (13/10/2008)

Bestech Australia provide the Optris CT laser infrared thermometer that facilitates non-contact temperature measurement with precise aiming from -40°C to 975°C. It can measure low and high temperatures of the smallest spots, ...

XA1100 Series shock measurement accelerometers from Bestech Australia (10/10/2008)

The XA1100 Series shock measurement accelerometers, from FGP Sensors and Instrumentation, France are specifically designed for high level shock measurements of up to 100,000g. The XA1100 Series shock measurement accelerometers ...

The CD1140 series contactless torque sensors

The CD1140 series of contactless torque sensors available from Bestech Australia (7/10/2008)

The CD1140 series of contactless torque sensors from FGP Sensors and Instrumentation, available from Bestech Australia, offer a rugged but small package size as well as many mounting configurations that provide measurements ...

Micro-Epsilon’s multiNCDT Eddy Current displacement sensors available from Bestech Australia (6/10/2008)

Bestech Australia offer easy-to-use Micro-Epsilon’s multiNCDT Eddy Current displacement sensors, which can be used as the monitoring devices. When a certain strain (crack widening) is exceeded on the frame construction a ...

Strain Checker FGMH-1 frictional strain gauge available from Bestech Australia (6/10/2008)

Bestech Australia have introduced the Strain Checker FGMH-1 frictional strain gauge, from TML, Japan.

Signal conditioning system available from Bestech Australia (1/10/2008)

Bestech Australia provide the Precision 28000 signal conditioning system from Precision Filters. The signal conditioning system provides great flexibility in managing test measurements, with hundreds of channels and a mix ...

A30 MEMS single-axis accelerometer available from Bestech Australia (25/09/2008)

Bestech Australia introduce the A30 MEMS high performance single-axis accelerometer from Gladiator Technologies.

Universal type digital panel meter available from Bestech Australia (24/09/2008)

Bestech Australia have introduced the A6000 series of universal type digital panel meters from Asahi Keiki, Japan.

Displacement sensors for racing cars available from Bestech Australia (18/09/2008)

Bestech Australia offer clutch wear sensors for racing cars that often experience stress on the circuits. The clutch is an important component in a car and is subject to extreme stress.

DEMEC mechanical strain gauge from Bestech Australia (12/09/2008)

Bestech Australia offer DEMEC Mechanical Strain Gauge, a single instrument which can take reliable and accurate strain measurements at different points on a structure.

AST4000 industrial grade pressure sensor from Bestech Australia (8/09/2008)

Bestech Australia have introduced a low cost industrial grade pressure sensor, AST4100, from American Sensor Technologies.

Bestech Australia introduce CT glass infrared thermometer (8/09/2008)

Bestech Australia presented the optris CT glass, a precise non-contact glass temperature measurement device.

TH – 2M/5M universal isolate transducer from Bestech Australia (4/09/2008)

Bestech Australia offer the TH – 2M/5M universal isolate transducer from the Japanese company, Asahi Keiki. This is a transducer housed in a thin case, which converts DC input voltages and currents into the required voltage ...

Triaxial integral electronics piezoelectric accelerometer available from Bestech Australia (4/09/2008)

Bestech Australia have introduced the VIP Sensors Model 2100A series triaxial accelerometer, a stud mounted piezoelectric accelerometer designed for general vibration measurement on structures and objects.

KDG-PA/KDH-PA stainless-steel soil pressure gauges from Bestech Australia (1/09/2008)

Bestech Australia present a range of soil pressure gauges from TML, Japan for civil engineering uses. These strain-gauge type transducers electrically measure soil pressure and then convert this into mechanical strain, which ...

CapaNCDT 6100 displacement transducer from Bestech Australia (29/08/2008)

The CapaNCDT 6100, a precision non-contact capacitive displacement-measuring tool from Micro-Epsilon, is available in Australia and New Zealand from Bestech Australia.

AccuRange 4000 family of optical distance measuring sensors from Bestech Australia (26/08/2008)

Bestech Australia present the AccuRange 4000 family of optical distance measuring sensors from Acuity. With the ability to take measurements from zero to 54ft, the AccuRange 4000 family of optical distance measuring sensors ...

LVDT series of linear inductive gauging sensors from Bestech Australia (22/08/2008)

Bestech Australia have offered the LVDT series of linear inductive gauging sensors from Micro-Epsilon. Accurate even under difficult ambient conditions and possessing long-term stability, the LVDT series is suitable for ...

ScanControl 2810 profile sensor from Bestech Australia (18/08/2008)

Bestech Australia’s ScanControl 2810, a high speed profile sensor from German company Micro-Epsilon, measures beading and grooves at speeds of up to 4kHz. Operating as a laser line scanner, the ScanControl 2810 uses the ...

optoNCDT 2400 Confocal displacement measurement system from Bestech Australia (13/08/2008)

Bestech Australia offers optoNCDT 2400 to measure displacement with nanometer resolution. The sensor measurement ranges extend from 80µm to 24mm. This confocal displacement system can take distance measurements on glossy ...

Macrosensors' CD 375 Series of miniature LVDTs available from Bestech Australia (12/08/2008)

Bestech Australia has launched CD 375 Series of miniature LVDTs, with diameter of 9.5mm, from Macrosensors.

CBM series strain calibrator from Bestech Australia (1/08/2008)

Bestech Australia has introduced the CBM series strain calibrator, a product of TML- Japan. The CBM series strain calibrator is a highly stable strain calibrator used for checking the operation of strainmeters and switching ...

TC-31L digital load meter available from Bestech Australia (31/07/2008)

The TC-31L, available from Bestech Australia, is a handheld, battery operated digital load meter for direct reading of load, displacement, etc.

131S series low cost pressure transducers from Bestech Australia (30/07/2008)

Bestech Australia offers 131S series low cost pressure transducers that are ideal for pressure measurements including negative pressure, in general industrial applications. The 131S series low cost pressure transducers are ...

Signal conditioner available from Bestech Australia (25/07/2008)

Bestech Australia has introduced LVC-2500, a single channel signal conditioner that operates on 10-30VDC power to support standard LVDT, RVDT, and VRT half-bridge sensors.

WPS series miniature draw wire displacement sensors from Bestech Australia (24/07/2008)

Bestech Australia offers the WPS series miniature draw wire displacement sensors to measure the linear movement of a component using a wire of highly flexible, stainless steel strands. A striking feature of the WPS series ...

TMR 200 multi-channel data acquisition system from Bestech Australia (18/07/2008)

Bestech Australia has introduced TMR 200 multi-channel data acquisition system from TML, Japan.

U05 (65) series of miniature eddy current displacement sensors from Bestech Australia (17/07/2008)

Bestech Australia offers U05 (65) series of miniature eddy current displacement sensors from Micro-Epsilon, Germany. The diameter at the sensor face is 2.3mm and the overall length measures 5mm. The U05 (65) series of miniature ...

CT laser 1M/2M IR thermometer from Bestech Australia (16/07/2008)

Bestech Australia has introduced CT laser 1M/2M from Optris Germany. The CT laser 1M/2M is a high performance IR thermometer with programmable electronics and double laser aiming.

ILR series long distance time of flight laser sensors from Bestech Australia (15/07/2008)

Bestech Australia offers ILR series long distance time of flight laser sensors from Micro-Epsilon, Germany. The ILR series long distance time of flight laser sensors includes gauging sensors with a range up to 10m and distance ...

Optris MiniSight non contact infrared temperature thermometer series from Bestech Australia (7/07/2008)

Bestech Australia offers Optris MiniSight non contact infrared temperature thermometer series with laser aiming and optical resolution of up to 20:1.

AST47SM Still Mill pressure sensors from Bestech Australia (2/07/2008)

AST47SM Still Mill pressure sensors are able to perform in the harsh environment and meet the high demands of the steel and aluminium industry.

Bestech Australia introduces universal type digital panel meter (30/06/2008)

Bestech Australia has introduced model A5000, a low cost, universal-type digital panel meter.

AR600 series laser displacement sensors from Bestech Australia (23/06/2008)

The AR600 series laser displacement sensors available from Bestech Australia are high accuracy measuring devices for industrial application.

Pressure switches from Bestech Australia (19/06/2008)

Bestech Australia has introduced the pressure switch model AST1000 from AST, USA.

CDP spring loaded strain displacement transducer from Bestech Australia (17/06/2008)

CDP spring loaded strain displacement transducer from TML, Japan is distributed in Australia and New Zealand by Bestech Australia.

Ratiometric Electronic Inclinometer from Bestech Australia (16/06/2008)

Bestech Australia offers Spectrotilt Ratiometric Electronic Inclinometer, a fully signal conditioned single axis tilt sensor.

ILD1300 laser displacement CCD sensor from Bestech Australia (13/06/2008)

Bestech Australia offers ILD 1300, a low cost high performance laser displacement CCD sensor with completely integrated digital signal processor.

Bestech Australia’s Triaxial Piezoelectric Accelerometer for vibration measurement

Triaxial Piezoelectric Accelerometer from Bestech Australia (12/06/2008)

Bestech Australia has introduced the Smart Triaxial Piezoelectric Accelerometer Model 2330 from VIP Sensors, USA. It is designed for vibration measurement in three orthogonal axes.

OLV miniature liquid level switches from Bestech Australia (12/06/2008)

OLV miniature liquid level switches are available from Bestech Australia.

Draw wire displacement sensors from Bestech Australia (10/06/2008)

Bestech Australia offers a wide range of draw wire displacement sensors, also known as pull wire or string pot.

Bestech Australia introduces eddy current and inductive displacement sensors (9/06/2008)

Bestech Australia has introduced non-contact displacement sensors from Micro-epsilon, Germany that use eddy current technology to measure distance, displacement or position of electrically-conductive targets.

KB-B inclinometer available from Bestech Australia (6/06/2008)

Bestech Australia has introduced KB-B inclinometer from TML, Japan that is used to measure the inclination of structures subject to strong impact or the inclination of piles when they are driven into the ground.

Motor sports sensors available from Bestech Australia (5/06/2008)

Motor sport pressure, force and acceleration sensors are available in Australia and New Zealand from Bestech Australia.

Bestech Australia introduces rotary position sensors (30/05/2008)

Bestech Australia has introduced rotary position sensor, RSE 1500, from Macrosensors, USA.

Rugged industrial pressure sensor AST4000 from Bestech Australia (30/05/2008)

Bestech Australia has released an industrial grade pressure sensor, AST4000, from American Sensor Technologies.

Thickness measurement system from Bestech Australia (21/05/2008)

Eddy current thickness measurement system with three fixed tracks, available from Bestech Australia, has been adapted for in-line inspection of thickness.

OptoNCDT 1607 displacement measurement sensor

Bestech Australia introduces displacement measurement sensor (20/05/2008)

Bestech Australia has introduced a high speed laser non-contact displacement measurement sensor- OptoNCDT 1607, with analogue signal processing.

XA1100 series shock measurement accelerometer

XA1100 shock measurement accelerometer from Bestech Australia (12/05/2008)

XA1100 series accelerometer is specifically designed for high level shock measurement, up to 100 000g.

Dynamic strain recorder available from Bestech Australia (30/04/2008)

Bestech Australia has introduced a compact flash storage type dynamic strain recorder DC-204R and DC-204Ra, featuring an ultra-small size to measure strain, DC voltage and thermocouples.

G50Z Low Cost High Performance MEMS Single Axis Gyro from Bestech Australia (29/04/2008)

Bestech Australia has introduced G50Z Low Cost High Performance MEMS Single Axis Gyro from Gladiator Technologies, USA.

Strain displacement transducer from Bestech Australia (16/04/2008)

CDP spring loaded strain displacement transducer from TML, Japan is distributed in Australia and New Zealand by Bestech Australia.

TD-91B digital indicator available from Bestech Australia (15/04/2008)

Bestech Australia has introduced TD-91B, an instrumentation digital indicator for measuring load, displacement, pressure and other strain gauge based transducers.

Laser line profile sensor system available from Bestech Australia (31/03/2008)

Bestech Australia has introduced laser-line profile sensor, scanCONTROL 2800/2810.

ILD 1700 laser displacement measurement system

Laser displacement measurement system from Bestech Australia (31/03/2008)

ILD 1700 is a compact CCD-laser displacement sensor with high resolution, repeatability and accuracy.

High temperature LVDT position sensors available from Bestech Australia (17/03/2008)

Bestech Australia has introduced hermetically sealed LVDT series for high temperature displacement measurement applications.

Bestech Australia introduces submersible hydraulic level probes (12/03/2008)

Bestech Australia has introduced submersible hydraulic level probe designed for gauge pressure (relative) applications.

Laser distance sensors available from Bestech Australia (11/03/2008)

Acuity offers AR600 series laser displacement sensor for steel industry which is designed to measure to glowing targets.

Motor sports Tri-Axial Accelerometer available from Bestech Australia (10/03/2008)

Bestech Australia has introduced XA3001 series of tri-axial accelerometers from FGP, France.

Digital strain meter from Bestech Australia (5/03/2008)

Bestech Australia offers the hand held Digital Strain meter from TML, Japan to read strain gauge and strain gauge based transducer inputs, DC voltage, thermocouples and platinum resistance temperature devices.

Dual axis electrolytic tilt sensors from Bestech Australia (20/02/2008)

Bestech Australia offers SP5000 and AU6000 series of dual axis electrolytic angle tilt sensors with performance, quality and reliability.

Telemetry system for dynamic strain measurements from Bestech Australia (19/02/2008)

Bestech Australia offers a Telemetry system for dynamic strain measurement of rotating or moving objects manufactured by TML, Japan.

Bestech Australia introduces optical confocal displacement measuring system (11/02/2008)

Bestech Australia has introduced an optical confocal displacement measuring system with a resolution of up to five nanometers.

Dual axis digital inclinometer from Bestech Australia (8/02/2008)

Spectron, USA has introduced a dual axis digital inclinometer model SSY0091P which combines the SP5000 series sensor with CMOS or custom designed hybrid signal conditioning circuitry.

Miniature rotating paddle sensors from Bestech Australia (7/02/2008)

R7 series miniature rotating paddle sensors manufactured by Nohken, Japan are compact and reliable units and are designed for use in plastic moulding or injection machines and extruders.

AR3000 Laser Measurement sensor available from Bestech Australia (31/01/2008)

The long distance displacement measurement sensor AR3000 is distributed in Australia and New Zealand by Bestech Australia.

New LandMark10 MEMS IMU/ GPS from Bestech Australia (24/01/2008)

Gladiator Technologies, USA announce the launch of the LandMark10 MEMS IMU/ GPS which has synchronized GPS and Inertial Timing and Rechargeable Internal Battery.

Bestech Australia introduces submersible hydraulic level probes (27/11/2007)

Bestech Australia has introduced a submersible hydraulic level probe designed for gauge pressure (relative) applications.

Bestech Australia introduces new version data logger (20/11/2007)

The data logger TDS 530 when combined with high speed switching boxes can provide up to 1,000 channels of data that can be scanned in 0.4 seconds.

Double-ended shear-beam load pins available from Bestech Australia (7/11/2007)

Load pins serve to measure traction force in crane systems, hoppers, process control and onboard vehicle systems.

Draw wire sensor available from Bestech Australia (7/11/2007)

The new miniature draw-wire displacement sensor measures the linear movement of a component using a wire of highly flexible stainless steel strands.

New series strain bridge amplifier available from Bestech Australia (30/10/2007)

New 8 to 16 channel strain bridge amplifier available from Bestech Australia has a 16 bit resolution and can do 200 ksamples/ second.

A6000 series universal type digital panel meter available from Bestech Australia (29/10/2007)

Bestech Australia introduced a well priced universal type digital panel meter with a fast conversion rate. This model A6000 is manufactured by Asahi-Keiki, Japan.

Bestech Australia introduces full bridge strain gauge (25/10/2007)

The strain gauge has two longitudinal and two lateral grids expansion strain gauges.

Digital accelerometer available from Bestech Australia (24/10/2007)

Bestech Australia has introduced a digital accelerometer from silicon designs of USA. This model 1010 is a low cost, integrated accelerometer for use in zero to medium frequency instrumentation applications.

Submersible load cell FN4074 from Bestech Australia (15/10/2007)

Submersible load cell FN4074 manufactured by FGP is designed to measure the tension on submarine mooring lines.

Linear variable differential transformer available from Bestech Australia (8/10/2007)

Case expansion measurements also allow determination of whether expected thermal growth differentials are being exceeded on the machine.

G2 dual function force gauge available from Bestech Australia (1/10/2007)

The G2 dual function force gauge can measure force as well as clockwise and anti-clockwise torque. Offering sophisticated features in both force and torque modes, the G2 dual function force gauge will be a useful test instrument ...

Bestech distributes Gladiator Technologies’ MEMS LandMark10 AHRS system (1/10/2007)

MEMS LandMark10 AHRS is a silicon MEMS 6 Degrees of Freedom (6DOF) digital altitude and heading reference system, manufactured by Gladiator Technologies of USA.

Strain gauge-type transducers from Bestech Australia (28/09/2007)

TML strain gauges available in Australia and New Zealand from Bestech Australia are used not only for strain measurement but also as sensors for strain gauge-type transducers.

Turbocharger speed sensor available from Bestech Australia (14/09/2007)

The turbocharger speed sensors measure without contact by using the eddy-current effect and are consequently free from any mechanical wear and are maintenance free.

New series laser sensor available from Bestech Australia (13/09/2007)

AR4000-LIR laser rangefinders from Acuity, USA are being used in the forest products manufacturing industry.

New series low pressure transmitters available from Bestech Australia (12/09/2007)

American Sensor Technologies (AST) has released two new AST44LP and AST43LP low-pressure, hazardous area-approved pressure transmitters.

New series laser profile sensor available from Bestech Australia (24/08/2007)

The High Speed 2D/3D profile laser sensor can be used for an inline inspection, which detects even the slight bulge, recess or other surface defect that may affect the performance of the tyre.

Laser triangulation sensor available from Bestech Australia (22/08/2007)

The production of roof tiles places high demands on measurement and testing methods for ensuring constant high product quality. A laser triangulation sensor by Micro-Epsilon, ILD 1800 is used for 3D inspection and for surface ...

New series strain gauge available from Bestech Australia (21/08/2007)

The ME systems’ strain gauge full bridge DA FAE4-A6355J is supplied with a connection cable of 5m length and a clip that serves to relieve tension and to facilitate installation.

CDP strain displacement transducer from Bestech (15/08/2007)

CDP spring loaded strain displacement transducer from TML, Japan is distributed in Australia and New Zealand by Bestech Australia. It is a compact, easy to operate spring loaded strain displacement transducer, also referred ...

New shock measurement accelerometer from Bestech Australia (14/08/2007)

The XA1100 series accelerometer is specifically designed for high level shock measurement, up to 100 000g. This piezoresistive accelerometer takes advantage of the new silicon strain gauge technology and manufacturing techniques.

Bestech Australia introduces Tri-axial rugged accelerometer (1/08/2007)

Bestech Australia has introduced the FGP general purpose tri-axial accelerometer FA3403. This tri-axial accelerometer uses capacitive technology and offers a full scale range from 2 to 500g and a good signal/noise ratio ...

Bestech Australia introduces new AST47HP series pressure sensors (31/07/2007)

Bestech Australia has introduced new AST47HP series of pressure sensors from AST, USA which satisfies the growing need for pressure sensors with higher pressure ratings.

AR200 laser displacement measurement sensors from Bestech Australia (14/06/2007)

AR200 laser displacement measurement sensors from Acuity, USA are ideal and a cost effective way for measuring steel strip thickness to fine resolutions.

Bestech introduces tension/ compression bolt on strain sensor (14/06/2007)

Bestech Australia has introduced DA120 tension/ compression bolt on strain sensor manufactured by ME-Systems, Germany.

Bestech Australia unveils A5000 series digital panel meter (11/05/2007)

Model A5000 digital indicator has an optional analogue output or digital output like RS232C or RS485.

Laser measuring products available from Bestech (17/04/2007)

AR200 laser displacement measurement sensors from Acuity, USA are an ideal and a cost-effective way for measuring steel strip thickness to fine resolutions.

Float level switches available from Bestech (12/03/2007)

OLV miniature liquid level switches are manufactured by Nohken and are distributed by Bestech Australia.

Vacuum monitoring systems available from Bestech Australia (8/03/2007)

The vac control system available from Bestech Australia measures the cap deflection caused by the vacuum. A sensor scans the cap shape while the individual can, jar or bottle passes the measuring point.

Bestech's system for measurement of sprayed skin thickness

System to measure sprayed skin thickness from Bestech (2/03/2007)

Bestech Australia is offering a system for measuring sprayed skin thickness, which consists of an eddy current sensor and a laser displacement sensor ILD1700.

Laser displacement sensor from Bestech Australia (26/02/2007)

AR600 laser displacement sensors are a series of high accuracy measuring devices for industrial application.

Bestech presents new accelerometer (16/02/2007)

Presented by Bestech, the model 2012 accelerometer is a low-cost single axis accelerometer for measuring accelerations from ±2g to ±400g in commercial/industrial environments.

Spectrotilt ratiometric electronic inclinometers from Bestech (30/01/2007)

Spectrotilt ratiometric electronic inclinometer is a fully signal conditioned, single axis tilt sensor.

Multiaxial FN7325 Load cell from Bestech Australia (24/01/2007)

Multiaxial FN7325 load cell measures force from 0-5 KN to 0-250 kN along three axes as well as the corresponding torque from 0-200 Nm to 0-7000 Nm.

ILD1300 laser displacement sensors from Bestech Australia (23/01/2007)

ILD 1300 is a low cost high performance laser displacement CCD sensor with completely integrated digital signal processor.

FGP Sensors releases bi-directional load cell for use on rotating shaft bearing systems (24/11/2006)

FGP Sensors has designed a new bi-directional load cell for use on rotating shaft bearing systems.

Non-contact infrared thermometer (13/10/2006)

The non-contact infrared thermometer optris CT, available from Bestech Australia, sets a new standard for the industry. The optris CT is designed for use in mechanical engineering, thermoforming, automotive, paper making, ...

EDS rugged displacement sensors (13/09/2006)

EDS displacement sensors supplied in Australia and New Zealand by Bestech Australia are especially designed by Micro-epsilon, Germany for use in hydraulic and pneumatic cylinders. They also find applications in high vibration ...

Bestech Australia Pty Ltd introduces AST47SM Still Mill pressure sensors (24/08/2006)

Bestech Australia Pty Ltd has introduced AST47SM Still Mill pressure sensors, which can perform in harsh environment and meet the demands of steel and aluminum industry.

Strain gauges (8/08/2006)

BESTECH Australia Pty Ltd supplies a range of metal foil strain gauges both for transducer applications and stress analysis. For applications that require high gauge factor, semiconductor strain gauges are also available. ...

Compact laser measurement sensor (25/07/2006)

THE AR200 group of laser measurement sensors is Acuity's most compact series of triangulating laser displacement sensors available from Bestech Australia Pty Ltd. They are well priced, accurate measuring devices using CMOS ...

RSS Feed

News sign up |

Collapse Additional Bestech Australia News

News sign up

The LSB600 High Capacity Load Cell offered with USB Output (27/11/2009)

The LSB600 S-Beam Load Cell is a high capacity tension and compression transducer with a wide capacity, ranging from 10,000 lbs to 25,000 lbs.

Entry-level systems for tension and compression testing from SI Instruments (27/11/2009)

Mecmesin and SI Instruments continue to have success with its MultiTest-d test system, available in 1kN and 2.5kN capacities.

Endress+ Hauser Australia providing instrumentation for the water desalination plant at Kurnell, Sydney

Endress+ Hauser Australia instrumental in the construction of Sydney Water’s new desalination plant at Kurnell (25/11/2009)

Endress + Hauser Australia were selected to be one of three key members of the main automation alliance to engineer and supply all general instrumentation to the desalination plant at Kurnell.

Turck's BL compact family collects analog and digital signals at the source (25/11/2009)

Turck Australia BL Compact system is a modular I/O solution for collecting a variety of signals in a single, rugged node on a network.

WLL180T fibre-optic photoelectric sensor from Sick (24/11/2009)

The WLL180T fibre-optic photoelectric sensor from Sick is not only convenient, light-intensive, and compact; it is also very fast.

RSS Feed

News sign up

Sections

Ferret Newsletter

Be the first to know about new products, services and developments. Sign up for Ferret's Daily Product News.

Package Integrity Tester

More products from Bestech Australia

Additional Bestech Australia News

Related Articles

Sections