Bestech Australia has introduced laser-line profile sensor, scanCONTROL 2800/2810.
The scanCONTROL 2800/2810 laser line profile sensor from Micro-Epsilon Germany uses triangulation principle for two-dimensional acquisition of profiles on a variety of different target surfaces.
In contrast to familiar point laser sensors, a line optical system projects a laser line onto the surface of the object to be measured. The back scattered light from the laser line is registered on a CMOS array by a high quality optical system.
Along with distance information (z-axis), the controller also calculates the true position along the laser line (x-axis) from the camera image and outputs both values in the sensor's two-dimensional coordinate system.
A moving object or a scanning sensor will generate a three dimensional representation of the object.
High speed 2-D/ 3-D profile laser scanner
- 2-dimensional line profiles
- Works with various target surfaces
- 10µm resolution z-axis
- 1024 points in x-axis
- High accuracy
- Distortion free synchronous measurement
- High Speed measurement of up to 4000 profiles/ second
- Welding seam, glue bead inspection
- Door edges gap and flush
- Step and height measurement
- Robot guidance
- Groove width and depth
- Edge detection
- Tyre profile, roundness and deformation
The 3 dimensional laser line scanner is available in Australia and New Zealand from Bestech Australia.