Bestech Australia introduces a range of high resolution eddy current sensors from Micro-Epsilon, Germany.
The eddyNCDT 3700 non-contact eddy current displacement and position measurement system can measure to a linearity of 0.0025mm and resolution of only 0.009µm.
Eddy current displacement sensors are specially developed for applications with very high requirements of resolution.
These non-contact displacement sensors measure against electrically conductive, non-ferromagnetic materials. Eddy currents induced in the target material cause the impedance of a coil in the sensor to change and it is this impedance change, which is proportional to distance that is measured by the sensor.
Eddy current displacement sensors are intended for use in production systems for machine monitoring as a customised system for OEM applications.
Applications can include positioning in semiconductor manufacture, positioning of the optical system in microscopes and telescopes, air-gap monitoring in magnetic bearings as well as spindle movement in machine tools.
Measuring ranges vary from 0.5mm to 6mm, while linearity is ±5% FSO and resolution is 0.000018% FSO.
Due to the high repeatability, the system can be further optimised by computed linearization. The standard signal output is 0-10 VDC but other analogue signals are available on request.
The sensors have a miniaturised design and are ideal for OEM applications.
Eddy current displacement sensors are available in Australia and New Zealand from Bestech Australia