Home > High-linearity power amplifier available from Avnet Electronics Marketing

High-linearity power amplifier available from Avnet Electronics Marketing

Supplier News
article image High-linearity power amplifier

The ADL5570 semiconductor is a high-linearity power amplifier (PA) designed for mobile WiMAX terminals. The ADL5570 is optimised for operation in the 2.3-GHz to 2.4-GHz band and provides good performance across frequency bands from 2.5 GHz to 2.7 GHz. The ADL5570 provides high levels of linearity, output power and efficiency to ensure seamless connectivity and reduce battery drain in portable devices.

High levels of linearity, efficiency and output power

Battery life is a key consideration in the design of portable applications such as laptop computers, cellular handsets and PDAs.

The ADL5570 consumes half the current and provides a power-added efficiency (PAE) of more than 20%. This lower power consumption limits the need for heat sinks, increases system reliability and reduces size and cost.

The output power of the ADL5570 is complemented by high linearity, which enables the higher data rates and increased signal propagation required for reliable WiMAX broadband connections.

The output 1-dB compression point (P1dB) of 31 dBm allows the ADL5570 to operate in the linear region at output power levels of up to 26 dBm—at 3.5-V supply and 2.35 GHz—while maintaining an error vector magnitude (EVM) of less than 3% to minimize system-level signal noise.

The combination of high output power, efficiency and signal fidelity in the ADL5570 provide users of WiMAX communications devices longer operation and fewer breaks in transmission, maximizing their mobile broadband experience. Additionally, the ADL5570 features a gain of 29 dB, which allows the device to be used with a wide variety of transceivers.

Additional power savings modes

Operating with a single 3.2-V to 5.5-V supply, the ADL5570 consumes 250 mA root-mean-square (RMS).

A low-power mode ADL5570 is also available for operation at levels less than 10 dBm, with optimised operating and quiescent currents of 100 mA and 70 mA, respectively.

A standby mode is also available, which reduces the quiescent current to 10 mA and is useful when a time-division duplex terminal is receiving data.

The ADL5570 semiconductor is available from Avnet Electronics Marketing.

Newsletter sign-up

The latest products and news delivered to your inbox