Rapid Prototyping, Tooling and Manufacturing from Arrk Australia and New Zealand

By Arrk Australia and New Zealand

Got a Question about this product?

Enquire Now

Visit Website

Rapid Prototypes, Prototype Tooling, Production Tooling and Manufacturing

Rapid Prototypes, Prototype Tooling, Production Tooling and Manufacturing

SLA, SLS, Objet 3D, CNC Rapid Prototypes, Prototype Tooling, Production Tooling and Manufacturing

Prototyping and Pre Production
Arrk is one of the world's largest Rapid Prototyping (RP), Tooling and Manufacturing service providers.

Arrk provide cutting edge prototyping and pre production services with the following:

Comprehensive Stereolithography (SLA), Selective Laser Sintering (SLS) and Objet 3D Printers
CNC and Rapid Plastic (vacuum casting) capacity, offering a wide range of materials to suit most needs

Tooling and Moulding
Combined with Arrk's ever widening range of Tooling and Moulding capabilities this makes us the ideal choice to support your product development needs from prototype to production.

Applications of Arrk's Product Design Services
Arrk's project managers work with you to understand your product requirements and assist with enhancing your product design for manufacture, to ensure you get a quality and cost efficient product.

Arrk has an extensive range of experience working with Designers, Engineers and Industrial Architects from the following applications:

Automotive, Medical, Aerospace, Consumer Goods
Military, Telecommunications and Architectural Markets

Production Tooling and Manufacturing Services

Rapid Prototyping Services: Physical 3D models created by SLA, SLS, Objet, CNC technologies.
Rapid Plastic (vacuum casting): Silicone tooling for production runs of 1 to 100 units in a range of production simulant materials.
Prototype Tooling: Enables product development teams to validate their designs under real life circumstance.
Production Tooling and Moulding: Whether you're looking for a short run solution or full run production, Arrk's diverse manufacturing capabilities worldwide will make sure that your product development idea is fully realised while maintaining a higher product quality than you've ever experienced before.

Got a question about this product

More information about this product

Contact Details

Contact Arrk Australia and New Zealand

By sending this enquiry you will also be informed of other related opportunities.

First Name

Surname

* Your Name

So the supplier can address you personally

Phone

Will only be sent to the supplier, no one else

* Your Email

Will only be sent to the supplier, no one else

State

So you get the most relevant information

Personal Message

No Yes

Be the first to know about new products, services and developments. Send me Ferret's newsletter.

* does not match

Send Enquiry

News sign up

Arrk Australia and New Zealand News

SLS coloured parts available from Arrk Australia and New Zealand (23/10/2009)

Arrk Australia and New Zealand now supply SLS prototypes with a permanent surface colouring in a range of colours including silver, black, charcoal, red, burgundy, blue, dark blue, yellow and tan.

Direct Digital Manufacturing (DDM) for rapid prototyping

SMR Automotive Australia uses Arrk's Direct Digital Manufacturing (DDM) (2/09/2009)

SMR Automotive Australia (formerly Visiocorp) used Arrk Australia and New Zealand's Direct Digital Manufacturing (DDM) to expedite the manufacture of 350 units of prototype components.

500 production units supplied by ARRK in 5 days with Direct Digital Manufacturing (14/08/2009)

Manufacturer of advanced metal detectors, Minelab Electronics, was looking to extend the capabilities of the F3 Mine Detector to better meet its customer specific applications.

Design for Manufacture drives a faster path to market for Australian Medical technology companies (10/07/2009)

At last month’s 2009 AusMedtech Conference held in Sydney, design for manufacture emerged as a critical part of the DNA of successful Australian medical technology companies.

New Prototype Press Metal service from ARRK (9/07/2009)

ARRK Australia announced today a new Rapid Press Metal service. The new prototype service enables ARRK’s customers to receive high quality press formed prototypes without the upfront expense of full

m2m Imaging utilise ARRK vacuum casting technology for low volume production (17/06/2009)

m2m Imaging have recently commissioned ARRK Australia and New Zealand to produce 15 units of a new subject holding system. The system provides a platform to interchange various products used in MR ima

ARM utilise ARRK Australia and New Zealand rapid prototyping 3D printing technology for Melbourne theatre company (1/05/2009)

ARRK Australia and New Zealand offer a new technology for the creation of architecture 3D physical models. The new building design of the Melbourne theatre company (MTC) theatre at Melbourne’s Southbank Boulevard has incorporated ...

ARRK's new technology for the creation of architecture 3D physical models (30/04/2009)

ARRK offers ground breaking technology for the creation of architecture 3D physical models.

New rapid prototyping materials based on PolyJet matrix technology available from ARRK (3/04/2009)

ARRK Australia and New Zealand have offered their customer innovative new rapid prototyping materials. Based on Objet’s breakthrough PolyJet Matrix Technology, the new materials are created digitally

ARRK supplies versatile prototyping tooling and production services to Zodiac (20/03/2009)

The product development of the new product from Zodiac, the TRI Pool Chlorine Generator, is a classic case in which ARRK’s varied prototyping, tooling and production services were deployed to accelerate the product to market.

Aussie Racing Cars utilise Arrk Australia and New Zealand’s Selective Laser Sintering to meet production deadlines (2/12/2008)

Aussie Racing Cars were only a week away from the deadline of completing their new scaled-down Toyota Aurion racing car when they contacted Arrk Australia and New Zealand for assistance. The new car was to be launched live ...

ARRK sponsored team to race with SLS parts at FORMULA SAE-A 2008 (27/11/2008)

ARRK believe that engineering students of today are the future talent which industry will draw on to address future challenges. ARRK are focused in developing relationships with these students early-on to support them in ...

ARRK provide Alaris30 Printer from Objet (20/10/2008)

Objet have launched a new printer, the Alaris30, which is supplied by ARRK. Alaris 30 printer is an office-friendly system as it is small enough to fit on a desk. It prints true-to-life parts with exceptional detail, including ...

ARRK Australia and New Zealand offer Connex500 3D Digital Printing System (18/09/2008)

ARRK Australia and New Zealand have commissioned the Connex500 3D Digital Printing System, which is capable of printing parts and assemblies consisting of multiple model materials in a single build at the same time.

ARRK’s rapid prototyping technologies for Beijing’s National Aquatics Centre (5/08/2008)

5 years ago, ARRK’s team utilised advanced rapid prototyping technologies to create a 3D model of Beijing’s National Aquatics Centre, known today as the Water Cube. This week, Australia’s Swimming Team had their first training ...

New SLS insights from Arrk at NMW 2008 (6/03/2008)

Arrk will showcase new Selective Laser Sintering (SLS) materials on stand 2013 during National Manufacturing Week at the Sydney Convention & Exhibition Centre from May 27 to 30.

Arrk to exhibit multi-material printing technology at NMW 2008 (5/03/2008)

Arrk will profile the capabilities of a multi-material 3D printing system to simultaneously create a part or assembly with different materials (both hard and soft) on stand 1713 during National Manufacturing Week at the ...

Arrk offers a range of model making solutions (22/10/2007)

Arrk offers a range of model making solutions to suit its client’s specific needs.

EVRsafe and Arrk jointly develops a new detection unit (19/10/2007)

Arrk was approached by EVRsafe to discuss a new marina product, designed to detect and alert passengers of toxic gases.

Comparison of 5 most common Rapid Prototyping technologies in Australia and New Zealand

Arrk’s view on 5 common Rapid Prototyping technologies in Australia and New Zealand (18/10/2007)

Arrk made a close-up comparison to show resolution and accuracy of the 5 most common Rapid Prototyping technologies in Australia and New Zealand.

Arrk releases new rubber-like rapid prototyping material (9/10/2007)

The launch of TangoPlus is an improvement on the existing rubber-like materials, with elongation at break of 218% and improved durability and resistance to deterioration.

ThruFlow Interlocking panels available from Arrk (16/07/2007)

ThruFlow is strong, easy to install and light in weight. ThruFlow comes in interlocking tabs for ease of alignment and versatile configuration, allowing debris and water to pass through to minimise the effects of uplift ...

New 3D colour printer from Arrk at NMW 2007 (17/04/2007)

The key benefits of the new ZPrinter 450 3D colour printer will be highlighted by Arrk on stand 5014 during National Manufacturing Week 2007 at the Melbourne Exhibition & Convention Centre, from May 22 to 25.

New 3D colour printer from Arrk at NMW 2007 (17/04/2007)

Hydro tap available from Arrk (5/04/2007)

Hydro tap, designed by BlueSky Creative, is a sleek design that is giving the kitchen bench-top a new millennium look.

Arrk releases new 3D Colour printing machine (5/04/2007)

Arrk has released the new 3D Colour printing machine, known as the ZPrinter 450 making it affordable for everyone to bring rapid prototyping colour printing technology in-house.

Arrk launches new solution for hearing aid manufacturers (4/04/2007)

Arrk an innovative leader in rapid prototyping technologies has launched a new solution which is fast and cost efficient, for hearing aid manufacturers.

Rapid Prototyping technology from Arrk (20/03/2007)

Advancing architectural CAD software is allowing Architects to greater utilise Rapid Prototyping technologies to produce complex geometries and delicate features much faster than traditional model making techniques.

Rapid Prototyping machine from Arrk (20/03/2007)

As 3D CAD system’s become more accessible to Jewellery designers, it opens the door to a world of new design and manufacturing opportunities.

Arrk to hold a seminar on Outcome Driven Innovation (16/02/2007)

ARRK invites people to hear at first hand how Outcome Driven Innovation (ODI) is changing the way companies innovate.

Arrk acquires RPM Solutions and expands to South Australia (12/01/2007)

Arrk has released its expansion into South Australia, with the recent acquisition of RPM Solutions.

Objet's rapid prototyping 3D printer series (18/07/2006)

ARRK, distributor of Objet Rapid Prototyping machines, has announced a new range of 3D photopolymer jetting printers, including the Eden250 low cost office printer, the Eden350/V medium format printer and Eden500V large ...

Rapid Prototyping systems popular with Architects (18/07/2006)

ADVANCING architectural CAD software is allowing Architects to greater utilise Rapid Prototyping technologies to produce complex geometries and delicate features much faster than traditional model making techniques., says ...

Injection moulding services technology at NMW 2006 (13/04/2006)

ARRK, a leading producer and supplier of injection moulded and die-cast components, will feature its prototype-to-production ‘full-line’ service capabilities at Stand 3005 during National Manufacturing Week 2006 at Sydney's ...

New production moulding facility in Vic (4/10/2005)

ARRK has announced the expansion of its “Full-Line” service to include the manufacture of plastic injection moulded and diecast components at the company’s new Keysborough, Melbourne facility.

New materials in rapid prototyping range (14/04/2005)

Arrk Silhouette is launching new materials in its rapid prototyping range including a new a flexible material known as Tango.

Two new rapid prototyping resins (23/03/2005)

ARRK Silhouette has launched two new rapid prototyping resins from Objet's 3D printing range. These include the new Vero FullCure800 series, featuring opaque colours and improved mechanical properties, as well as the Tango ...

Engine produced on Objet 3D printer and RP Tool

Advanced tooling technologies (3/09/2004)

ARRK Silhouette (Stand 2206) will display a broad range of products from its advanced tooling technologies enabling Australian manufacturers to produce their own prototypes affordably in-house, particularly the automotive, ...

Ground-breaking rapid prototyping (31/03/2004)

THE world's largest rapid prototyping and tooling house, Arrk Silhouette, will display a full range of leading edge technologies at NMW 2004. A groundbreaking component of the range is Objet 3D Printing, an affordable printer ...

An easy way to produce flawless designs.

Prototyping in an office environment (24/01/2003)

ARRK Silhouette’s new machine, the Objet Quadra, is a user-friendly network inkjet system, that produces high resolution 3D models and prototypes directly from STL files. With the push of a button, Arrk makes it possible ...

The SLA 7000 -- tighter lead times and closer customer liaison.

Latest in rapid prototyping technology (14/08/2002)

ARRK Silhouette has installed the latest generation of solid imaging technology - SLA 7000. The SLA 7000 represents 15 years of R&D laser building technology, focused on delivering state-of-the-art rapid prototyping.

RSS Feed

News sign up |

Collapse Arrk Australia and New Zealand News

Sections

Ferret Newsletter

Be the first to know about new products, services and developments. Sign up for Ferret's Daily Product News.