Data Acquisition Control Systems and Software Analysis Range
Applied Measurement Australia's range of data aquisition control systems and software analysis cater for all industrial applications. The range includes,
- Data Acquisition and Embedded Systems
- PC-Based Control Systems
- Signal Conditioners
- Signal Analysis Software
Control System and Software Analysis Applications
Data Aquisistion Control Systems and Software Analysis from Applied Measurement are ideal for use in the following idustries and applications,
Factory Automation, Automotive, Mining Equipment, OEM Use, Level Detection, Construction Equipment, Road Automation, Robotics, Harvest Equipment, Military, Water and Oil Drilling Rigs, Building Automation, Railway, Weighing Systems, Transportation.
Data Acquisition and Embedded Systems
- Compact Standalone/Embedded or DIN-Rail
- MS Windows Embedded Platform
- Autonomous and self-Contain Module
- Wide Range of Digital & Analog Outputs (Force, Pressure, Stress, temperature, Frequency, acceleration, angle, distance, velocity, voltage, current)
- “Star” or “Daisy Chain” network via TCP/IP or CAN
- Built-in Wheatstone Bridge (full or Half or Quarter)
- Built-in Amplifier for measuring Devices (Load Cells, Strain Gauges, thermocouples)
- 24-Bit A/D converter
- 8x Digital Inputs, 8x Digital Outputs, 4x Analog Outputs
- 4x Counter inputs for capture of RPMs, displacements. etc
- Up to 512 field bus channels per experiment
- On Board Signal Analysis
- Isolation for all I/O and COMMs
- GPS Option
- Removable Flash Disk (Up to 16GB) Internal UPS with Alarms
- Remote access (GPRS/GSM) for Data logging and Setup
- WLAN capability (WiMax Option)
- Real-time applications of math operations (DSP), such as statistics, FFT, Filters, class-counting, freely defined virtual channels
- Real-time deduction
- Up to IP67 (Rugged & Robust Applications)
- Flatpanel Display Option
- Export, display, processing of CAN-bus messages (measured data)
- Up to 8 CAN-nodes (depending on busDAQ model)
- Operating Temperature Range: -45˚ to +85˚ (condensation Allowed)
- Initialization of CAN-bus sensors
- Easy parameterization via CAN-Bus Assistant
- Sending of Alarm Messages via CAN, TCP/IP & GPRS
- Logging of all events (messages) with time and date stamp
- Vector Database Linkage
- Supports Smart Sensors
- Auto Signature for Network Devices and Modules
- PC-Based Data Acquisition & Signal Analysis Software
- Third party Drivers for popular SCADA and Data Acquisition Software (including Labview)
PC-Based Control Systems
- MS Windows Platform
- Tower/Desktop, Panelmount or 19” Rackmount
- PCI, PCI-Express & PCI-X Slots
- PXI, Compact-PCI formats
- Variety of On-board I/O with added option to Add extra I/O
- Support all Major COMMs, i.e. TCP/IP, RS232, RS485, CAN
- Isolation for all I/O and COMMs
- Front-end and Back-end Access for I/O
- Video Capture and Encoding
- Hard-Drive and Flash Drive Support
- Operating Temperature Range: 0˚ to +65˚
- On-board Ventilation
- DC or AC Power Supply
- Standard connection for VGA interface (Flatpanel Display)
Signal Conditioner
- DIN-Rail & 3U 19” Rackmount Solution
- Signal Conditioning/Amplification for all sensors, transducers, Devices.. etc
- Output range from 0-10V, ±10V & 4-20mA
- Miniminal Interfacing Customization in PC, PLC, DCS and Data Loggers
- Back Panel Interfacing for Rackmount Solution
- Up to 10 modules for 19” Rackmount
- LED & LCD Indicator for 19” Rackmount Solution
- Peak/Valley Signal Hold
- Analog Add/Subtract
- Absolute Value Generator
- Frequency to Voltage
- Alarm Outputs
- Comparator
- Operating Temperature: 0 to 65˚C
Signal Analysis Software
- Uniform Software Package with Open System Architecture
- Real-time/On-line Displays for Multi-channels
- Freely defined computation of results from the measurement channels
- Monitoring of any measurement channel with Alarm / Triggered Response.
- Remote Real-time Access via CAN, GPRS etc
- Real-time Calculations for Open & Closed Loop Control Algorithms
- Integrated Data Browser
- Control commands for test process control and communication with other devices
- Event Logger to record all Functions
- 3D & 2D Analysis Built-in Curve Manager (Configure Curve Windows)
- 1 & 2 Dimensional Histograms
- Class-counting
- Filter Design
- Spectral Analysis
- Quartz timed Hardware interrupts with a resolution of 100uS
- An Integrated PID controller with dynamically loadable parameters
- Video (picture data and measurement data synchronized)
- Synchronized display of measurement curves and video data
- Improved, intuitive mouse operation
- Enhanced CAN message treatment
- Simplified marker functions
- COM Class Library
- Built-in Report Generator
- Importing & Exporting Data to different Formats
- Multi-page reports
- Order Tracking Analysis
- Verification of calibration data and monitoring of calibration intervals
- User-friendly sound output Compatible across all Window Packages
- Plug ‘n’ Play Sensor Database