Product Showcase
Air Suspension - If your work vehicle buckles under load, try riding on air for safety, stability and durability.
Product/Service Name
Ride-Rite air helper suspension kits.
Function/ApplicationsRide-on-air suspension kits are being introduced for owners of rough-riding work vehicles that threaten to buckle under the impact of heavy loads and second-rate roads that abound around NSW.
The extensive range of Firestone Rite-Rite® Air Helper spring kits from All Air Suspension suits light trucks, utes, vans and 4wd work vehicles fitted with conventional leaf-spring suspensions.
All Air Suspension is NSW and ACT distributor for the Airbag Man group of products, which also include coil replacement full air systems that provide the ultimate in ride height flexibility by fitting a heavy duty fabric-reinforced air spring in the same position as the removed coil.
Ride-Rite air helper suspension systems not only give better ride and handling but also the air springs can be inflated to different pressures to cope with uneven loads and varying weight distribution.
Identical in construction to the rugged Firestone air springs used on 40-tonne semi-trailers, Ride-Rite springs are inflated by standard workshop compressors or optional onboard compressor systems. They can handle 0-7 bar (0-100 psi) and up to 1100kg each (subject to chassis gross vehicle weight limits).
Ride-Rite kits are available for a wide range of the most popular work vehicles in Australia. These include Toyota Hilux, Troop Carrier and Landcruiser HJ/75 HJ/60 ;Holden Rodeo, Jackaroo and Commodore ute; Nissan Patrol; Mazda Bravo; Mitsubishi Triton and Pajero; and Ford Courier, Maverick, Transit, Falcon ute and F Series, plus many others.
Differentiating Features• Basic Ride-Rite kits for different types of vehicles, including two air helper springs, air lines with separate tyre-type inflation valves, hardware for proper installation and step-by-step instructions to permit installation using simple hand tools.
• Ride-Rite Air Compressor Accessory kit, containing a 12-volt air compressor, 2.25 litre tank, pressure switch and tubing to inflate not only the air helper springs, but also tyres.
• Ride-Rite Dual Cab Control Kit, Single Cab Control Kit, Automatic Control Kit and Level Command Kits. These can provide in-cab adjustment for unbalanced loads, including back-to-front and side-to-side loading problems.