Agilent Technologies
347 Burwood Hwy
Forest Hill VIC 3131
Tel: 1800 629 485
Fax: 1800 142 134

Supplier´s Website
Enquire now

Incorrect details?

close

Enquire NowVisit Website

Contact Details

MXG ATE signal generators available from Agilent Technologies

MXG ATE signal generators

Agilent Technologies  has announced new N5161A and N5162A MXG ATE analogue and vector RF signal generators for the cost-sensitive automated test equipment (ATE) environment.

In addition to these new models, Agilent Technologies has announced a series of enhancements to the MXG RF signal generators designed to deliver up to +23dBm output power, extend the distortion performance and provide phase coherency support for MIMO and beam forming applications.

Such enhancements make the MXG RF signal generators the ideal solutions for R&D and manufacturing engineers defining, developing, and optimizing wireless network and mobile communications test systems.

New MXG ATE RF signal generators
The MXG ATE RF signal generators provide the same industry-leading capabilities, performance and form factor of the popular MXG RF platform -- all at a reduced price.

The MXG ATE RF signal generators have been streamlined for ATE needs with removal of the front-panel display and all connectors relocated to the rear panel for convenient and secure rack configurations.

The N5161A MXG ATE analogue signal generator provides CW and analogue modulation, while the N5162A MXG ATE vector signal generator supports a multitude of digital modulation types up to 6GHz.

Combining the ideal MXG performance, in two rack-unit heights, with a base price reduction over the N5181A and N5182A MXG products, makes the MXG ATE RF signal generators ideally suited for today's demanding production environment.

Enhanced power and distortion capabilities

A key enhancement to the MXG is a hardware change that results in the best combination of high output power and low distortion performance:

• Output power - Increased from +13dBm to up to +23dBm (20MHz to 3GHz) and from +11dBm to +16dBm (3 to 6GHz) with Option 1EA. With its ideal output power, the MXG RF signal generators are able to overcome losses and drive high-power devices without an external amplifier, thereby simplifying test setup.
• Distortion -- specified ACPR performance of -71dBc for single-carrier W-CDMA up to +5dBm. Greater test margins and increased measurement accuracy stem from the signal generators' low distortion performance at high power levels. This performance not only improves test yield, but also allows the engineer to test higher-performance components.

MIMO and Beamforming capabilities
With its new enhancements, the MXG RF signal generators offer complete solutions for WLAN, WiMAX(tm), and LTE MIMO test, in as little as four rack units.

The MXG offers a compact, easy-to-use phase coherent test solution for 2xN MIMO and beamforming, and also enables system expansion to support up to 4xN.

When combined with the flexibility of Signal Studio software for signal creation, engineers now have a lower price alternative for beamforming and MIMO applications.

The MXG RF signal generators, available in two rack units, offer scalable performance that can be tailored to meet the stringent test requirements for components and devices used in cellular communications and wireless networking.

With options for frequency range, modulation enhanced dynamic range and an internal baseband generator up to 125MSa/s, the MXG can be configured to fit needs in R&D and manufacturing.

The N5181A comes in 1/3/6GHz frequency ranges, while the N5182A, N5161A and N5162A come in 3/6GHz frequency ranges.

The optional 100-MHz (125MSa/s) bandwidth arbitrary waveform generator in the vector version supports W-CDMA/HSDPA, cdma2000, WLAN, LTE, WiMAX, GSM/EDGE, and more general and format-specific arbitrary waveforms. The new enhancements to the Agilent MXG RF signal generators are now available.

Agilent Technologies News

Agilent Technologies introduce the 86100CU-400 PLL measurement software (3-Oct-2008)
Agilent Technologies have introduced the 86100CU-400 measurement software to make precise phase-Locked loop (PLL) measurements, also known as jitter transfer measurements.

Agilent Technologies extend the ENA series with the 20 GHz option and E5092A configurable multiport test set (2-Oct-2008)
Agilent Technologies have announced the addition of the 2/4 port, 20 GHz option to their ENA network analysers, and also the introduction of the E5092A configurable multiport test set. These new products feature RF performance which covers a wide frequency range, fast measurement speed and multiport measurement capability to the ENA network analysers.

Agilent Technologies introduce E6474A UMPC hand-held solutions (1-Oct-2008)
Agilent Technologies have introduced two new options for hand-held wireless measurements on their E6474A network optimisation platform, offering full drive test functionality to run on a compact handheld Ultra Mobile PC. The new hand-held solutions allow wireless service providers to make unobtrusive measurements in sensitive locations as they troubleshoot complex networks.

Agilent Technologies introduce E6474A UMPC hand-held solutions (26-Sep-2008)
Agilent Technologies have introduced two new options for hand-held wireless measurements on their E6474A network optimisation platform, offering full drive test functionality to run on a compact handheld Ultra Mobile PC. The new hand-held solutions allow wireless service providers to make unobtrusive measurements in sensitive locations as they troubleshoot complex networks.

View all  |  RSS Feed

Related Articles

AMS Instrumentation & Calibration appoint new Internal Sales Engineer (7-Oct-2008)
AMS Instrumentation & Calibration have announced the employment of Andy Singh as Internal Sales Engineer in the Victorian office.

PST- PRTemp1000D pressure and temperature recorder from Pacific Sensor Technologies (7-Oct-2008)
The PST-PRTemp1000D, available from Pacific Sensor Technologies, is a rugged pressure recorder to accurately monitor and record pressure and temperature at user programmable reading intervals.

Elsteel TECHNO modular switchboard systems from IPD Industrial Products (6-Oct-2008)
IPD Industrial Products have been stocking and supplying the Elsteel TECHNO modular switchboard system to Australian and New Zealand switchboard builders for many years.