Agilent Technologies has introduced four next-generation PXIT modules for optical transceiver manufacturing.
The PXIT family, unique in the manufacturing test industry for having both a combined bit error ratio tester (BERT) and digital communication analyser (DCA), now provides double the bit-rate coverage and improved performance.
The flexible modular platform allows optical transceiver manufacturers to combine key instruments needed to perform required measurements in one mainframe via the same interface. This helps reduce the cost of test and increase production throughput.
"We acquired PXIT in December 2006 to address the requirements of our customers in transceiver manufacturing," said Sigi Gross, vice president and general manager of Agilent's Digital Test Division.
"Our customers wanted a smaller, faster, more cost-effective solution. The release of the next generation of PXIT modules builds on all these traits and now provides customers with a solution that can test their next generation of products as well as their previous ones."
Four new PXIT modules:
- The N2100B PXIT 8.5 Gb/s digital communications analyser is a 4-slot module that allows customers to perform accurate eye-diagram analysis to characterise the quality of transmitters from 1 Gb/s to 8.5 Gb/s. The N2100B doubles the bit-rate coverage of the DCA and the number of possible filters to choose from
- The N2101B PXIT 10.7 Gb/s bit error ratio tester is a 3-slot module with a high-accuracy clock source, data-pattern generator and error detector that allows for automatic BER analysis to characterize the quality of devices. The N2101B version has more than doubled the upper line rate performance (10.7 Gb/s) and the number of supported internal lines rates, as well as a lower minimum line rate (155 Mb/s)
- The N2102B PXIT 11.1 Gb/s pattern generator is a 2-slot module capable of generating multiple patterns. The N2102B enables complete coverage from 622 Mb/s to 11.1 Gb/s with improved jitter and transition times
- The N2099A PXIT synthesiser is a 2-slot module that covers a 2 GHz tuning range and is available at a number of centre frequencies: 5.25GHz, 9.4GHz and 10.5GHz. The N2099A is a suitable clock source for the N2101B and N2102B modules when an external clock is required.