DALSA’s dual linescan CCD from Adept Electronic Solutions (22-Dec-2008)
DALSA’s novel dual linescan CCD breaks this trend. By doubling sensitivity with only a √2 increase in shot noise, the design delivers a greater signal to noise ratio, especially in light-starved situations. Functionally similar to TDI arrays, the design consists of two parallel arrays of photodiode pixels. Each pixel is connected to a selectable delay gate that either allows charges through or delays the charges by one scan line. Signal electrons from the two arrays (one of which has been delayed) are then combined on-chip into a single output (with no increase in amplifier noise). Because the delay is selectable, the sensor allows bidirectional scanning. The design also preserves conventional linescan features such as exposure control and high blue response. This dual linescan CCD is available from Adept Electronic Solutions.
DALSA Sapera Essential software imaging toolkit available from Adept Electronic Solutions (8-Dec-2008)
DALSA Sapera Essential, available from Adept Electronic Solutions, is a cost-effective software imaging toolkit that bundles the board level acquisition and control with image processing tools providing the critical functionality to design, develop and deploy high-performance machine vision applications.
New GigE cameras available from Adept Electronic Solutions (28-Nov-2008)
The GigE uEye SE (Standard Edition) series is available from Adept Electronic Solutions. The GigE uEye SE models are not only driver compatible with all cameras of the uEye range and across all interfaces, but also use the same SDK.
MV-D1024E-3D01 camera for 3D profiling using laser triangulation available from Adept Electronic Solutions (18-Nov-2008)
The MV-D1024E-3D01 camera, distributed by Adept Electronic Solutions, contains an image pre-processing module that specifically detects laser lines and locates the central axis of the laser line in 3D using triangulation. The MV-D1024E-3D01 is ideal for 3D applications such as 3D profiling for quality control, PCB inspection, food inspection, packaging inspection, and much more.
AVT long distance Firewire 1394a cables available from Adept Electronic Solutions (16-Oct-2008)
The FireWire standard specifies the maximum cable length for 1394a as 4.5m. However, 10m cables are also available. AVT introduce two longer FireWire cables, which can give a combined maximum length of 35 meters (114 feet) enabling the use of FireWire for applications that were previously unsuitable. These cables are available from Adept Electronic Solutions.