Adept Electronic Solutions
Perth / Sydney / Melbourne
Tel: 08 9242 5411 / 02 9979 2599 / 03 9823 6272
Fax: 08 9201 9991

Supplier´s Website
Enquire now

Incorrect details?

close

Enquire NowVisit Website

Contact Details

MV2-D1280 Camera series available from Adept Electronic Solutions

MV2-D1280 Camera series

Photonfocus has launched its camera series MV2-D1280-640, which has been developed for industrial applications requiring high frame rates.

Fast 1.3 megapixel sensor with 488 frames per second output

The MV2-D1280 Camera series, available from Adept Electronic Solutions , features a micron CMOS sensor with 1280 x 1024 pixel resolution.

Utilising global shutter, the MV2-D1280 Camera series is capable of speeds of up to 488fps at full resolution and higher frame rates are possible with reduced Region of Interest (ROI).

CameraLink full interface with 8 and 10 tap mode

The double connector, at the back of the camera, offers the high speed CameraLink full interface.

The new Photonfocus camera features selectable 8 or 10 tap output modes. A feature of the 10 tap mode is its adjustable clock rate to enable lower clock rates and allow for longer CameraLink cable lengths without risk of data loss.

The MV2-D1280 Camera series has many advanced features including MROI (Multiple Region of Interest), Decimation, CFR (Constant Frame Rate), Offset and Gain correction on camera (Shading Correction).

This new 1.3 megapixel camera is easy-to-use, has a good advanced feature set and will be a good use to integrators and users when handling demanding applications that require high frame rates.

Features:

• 1280 x 1024 pixel resolution
• Global shutter
• Dynamic range up to 60 dB
• Up to 488 fps @ full resolution
• Faster frame rates with Multiple Regions of Interest (MROI)
• CameraLink interface
• 8 bit greyscale
• Good Signal-to-Noise Ratio (SNR)
• 10 to 8 bit Look-up Table (LUT)
• y decimation for faster frame rates
• On shading correction
• Pixel Professor ready
• CE, RoHS and WEEE compliant

Some application examples are listed below:

Machine vision:

• Standard vision applications
• PCB inspection
• Laser triangulation

Motion analysis:

• High-speed object tracking
• Slow-motion sequences
• Biomedical application

Adept Electronic Solutions News

DALSA’s dual linescan CCD from Adept Electronic Solutions (22-Dec-2008)
DALSA’s novel dual linescan CCD breaks this trend. By doubling sensitivity with only a √2 increase in shot noise, the design delivers a greater signal to noise ratio, especially in light-starved situations. Functionally similar to TDI arrays, the design consists of two parallel arrays of photodiode pixels. Each pixel is connected to a selectable delay gate that either allows charges through or delays the charges by one scan line. Signal electrons from the two arrays (one of which has been delayed) are then combined on-chip into a single output (with no increase in amplifier noise). Because the delay is selectable, the sensor allows bidirectional scanning. The design also preserves conventional linescan features such as exposure control and high blue response. This dual linescan CCD is available from Adept Electronic Solutions.

New GigE cameras available from Adept Electronic Solutions (28-Nov-2008)
The GigE uEye SE (Standard Edition) series is available from Adept Electronic Solutions. The GigE uEye SE models are not only driver compatible with all cameras of the uEye range and across all interfaces, but also use the same SDK.

MV-D1024E-3D01 camera for 3D profiling using laser triangulation available from Adept Electronic Solutions (18-Nov-2008)
The MV-D1024E-3D01 camera, distributed by Adept Electronic Solutions, contains an image pre-processing module that specifically detects laser lines and locates the central axis of the laser line in 3D using triangulation. The MV-D1024E-3D01 is ideal for 3D applications such as 3D profiling for quality control, PCB inspection, food inspection, packaging inspection, and much more.

AVT long distance Firewire 1394a cables available from Adept Electronic Solutions (16-Oct-2008)
The FireWire standard specifies the maximum cable length for 1394a as 4.5m. However, 10m cables are also available. AVT introduce two longer FireWire cables, which can give a combined maximum length of 35 meters (114 feet) enabling the use of FireWire for applications that were previously unsuitable. These cables are available from Adept Electronic Solutions.

View all  |  RSS Feed

Related Articles

Fluke-287 True-RMS Electronics logging multimeter available from RS Components (9-Jan-2009)
The Fluke-287 True-RMS Electronics logging multimeter with TrendCapture from RS Components quickly documents and graphically displays design performance. Its unique logging and graphing capabilities mean that it is no longer needed to download logged readings to a PC to detect a trend.

Weller rework solder station available from RS Components (8-Jan-2009)
The Weller rework solder station, available from RS Components, has three independent tool channels with three temperature presets each, and automatic tool detection allowing simultaneous operation of three tools.

Kistler Staiger Mohilo torque transducers available from SI Instruments (8-Jan-2009)
Kistler Staiger Mohilo torque transducers, available from SI Instruments, offer a complete range of individually engineered force and torque measurement solutions to suit test rig applications, research and development, production processes and quality assurance.

Moxa’s EDS-510A industrial managed Ethernet switch available from CrispTech (8-Jan-2009)
CrispTech and Moxa offer EDS-510A, an industrial managed Ethernet switch that bears the IPv6 (Industrial Protocol version 6) Ready Logo.