Adept Electronic Solutions
Perth / Sydney / Melbourne
Tel: 08 9242 5411 / 02 9979 2599 / 03 9823 6272
Fax: 08 9201 9991

Supplier´s Website
Enquire now

Incorrect details?

close

Enquire NowVisit Website

Contact Details

Adept Electronic Solutions to exhibit at Reed Exhibitions’ NMW 2008

Adept Electronic Solutions  will demonstrate new versions of its technologically-advanced, automated vision inspection and imaging products such as vision systems, cameras and optics on Stand 4706 during Reed Exhibitions National Manufacturing Week 2008, at the Sydney Convention and Exhibition Centre, from May 27 to 30.

Headlining the display will be live demonstrations of Dalsa’s newest Vision Appliances equipment for factory-automated inspections.

The equipment, designed to be versatile and easy-to-use, provides quick user setup, factory-friendly wiring and supports multiple cameras with a choice of sensor resolution.

Vision Appliances incorporate the smarts inside the camera controller, rather than the camera head, which allows them to be easily interfaced with other automation controllers, while the small camera heads lend themselves to easy mounting and robotic applications.

The multiple camera capability of the products also provides significant cost savings in multi-camera applications.

Experienced engineers from Adept Electronic Solutions will be on hand to discuss applications, lighting and optics.

Products being demonstrated will include:

• VA61 Vision Appliance, featuring GigE cameras and offering 100 m cable lengths and high resolution at high speed
• Ease of use Dalsa iNspect software on a VA41 Vision Appliance, giving simultaneous, high-speed bottle label and bottle cap inspection
• Economical VA15 and VA21 for cost-sensitive applications
• Dalsa Sherlock vision software for powerful and sophisticated inspection applications
• Optronis CamRecord cameras for precision high-speed image capture; these cameras run at up to 200,000 frames per second, allowing the capture and storage of images for later analysis and are commonly used for mechanical fault-finding, ballistics testing, sporting events replay and sports analysis
• Xenics near, mid wave and long wave infrared cameras, both cooled and uncooled; suitable applications include predictive maintenance and inspection, thermography, research and development and industrial process monitoring

Adept Electronic Solutions News

DALSA’s dual linescan CCD from Adept Electronic Solutions (22-Dec-2008)
DALSA’s novel dual linescan CCD breaks this trend. By doubling sensitivity with only a √2 increase in shot noise, the design delivers a greater signal to noise ratio, especially in light-starved situations. Functionally similar to TDI arrays, the design consists of two parallel arrays of photodiode pixels. Each pixel is connected to a selectable delay gate that either allows charges through or delays the charges by one scan line. Signal electrons from the two arrays (one of which has been delayed) are then combined on-chip into a single output (with no increase in amplifier noise). Because the delay is selectable, the sensor allows bidirectional scanning. The design also preserves conventional linescan features such as exposure control and high blue response. This dual linescan CCD is available from Adept Electronic Solutions.

New GigE cameras available from Adept Electronic Solutions (28-Nov-2008)
The GigE uEye SE (Standard Edition) series is available from Adept Electronic Solutions. The GigE uEye SE models are not only driver compatible with all cameras of the uEye range and across all interfaces, but also use the same SDK.

MV-D1024E-3D01 camera for 3D profiling using laser triangulation available from Adept Electronic Solutions (18-Nov-2008)
The MV-D1024E-3D01 camera, distributed by Adept Electronic Solutions, contains an image pre-processing module that specifically detects laser lines and locates the central axis of the laser line in 3D using triangulation. The MV-D1024E-3D01 is ideal for 3D applications such as 3D profiling for quality control, PCB inspection, food inspection, packaging inspection, and much more.

AVT long distance Firewire 1394a cables available from Adept Electronic Solutions (16-Oct-2008)
The FireWire standard specifies the maximum cable length for 1394a as 4.5m. However, 10m cables are also available. AVT introduce two longer FireWire cables, which can give a combined maximum length of 35 meters (114 feet) enabling the use of FireWire for applications that were previously unsuitable. These cables are available from Adept Electronic Solutions.

View all  |  RSS Feed

Related Articles

LINAK Australia’s Technical Manager reports on MEDICA 2008 Hospital and Care exhibition (22-Dec-2008)
LINAK Australia’s Technical Manager, Carsten Andersen, recently flew to Germany to attend a Hospital and Care exhibition, MEDICA 2008. The exhibition was well organised right from getting there by taxi, bus or train to ticketing, food outlets and finding the way around the halls. Similar exhibitors were clustered in the same areas/halls, so targeting a specific interest group was fairly easy.

Livingstone International exhibit at the Safety Show Sydney 2008 (17-Nov-2008)
Livingstone International have exhibited a wide range of products at the 2008 Sydney Safety Show, which included first aid kits, gloves, bandages, dressings, protective wear, safety signs, and hot and cold packs.