Adept Electronic Solutions
Perth / Sydney / Melbourne
Tel: 08 9242 5411 / 02 9979 2599 / 03 9823 6272
Fax: 08 9201 9991

Supplier´s Website
Enquire now

Incorrect details?

close

Enquire NowVisit Website

Contact Details

AVT long distance Firewire 1394a cables available from Adept Electronic Solutions

AVT long distance Firewire 1394a cables

The two 1394a cables are 12.5m and 17.5m in length, have latched connectors and can be independently used without any other accessories such as repeaters. However they can also be joined with the use of an AVT repeater to give a 35m total cable length. This has been thoroughly tested and proven reliable by AVT.

Both new cables appear as standard FireWire cables but are able to support the data transfer for much longer distances. This is primarily due to their innovative design, high quality components and special production methods used in construction. These cables like all of AVT's FireWire cables feature heavy shielding to minimise EMC susceptibility.

These high-quality cables have been assembled with MOLEX latch connectors to ensure trouble-free connections even under moving or vibrating conditions. The cables carry power over the FireWire connection. If the repeater is used to create a 35m cable, it does not require the external power. It uses the power carried over the FireWire connection.

These cables are designed specifically to be used with any of the AVT IEEE 1394a camera families of MARLIN, OSCAR or GUPPY but can also be used with any of the AVT 1394b cameras as they are backwardly compatible with 1394a.

The highlights of the cables are:

• Compliant with IEEE 1394a
• Molex latch connectors
• Low damping AWG 24 construction
• Double shielding with ferrite coils to ensure FCC class b
• UL 20276 certified and RoHS compliant
• Pb free PVC jacket
• Compatible with AVT's IEEE 1394a cameras

Adept Electronic Solutions News

DALSA’s dual linescan CCD from Adept Electronic Solutions (22-Dec-2008)
DALSA’s novel dual linescan CCD breaks this trend. By doubling sensitivity with only a √2 increase in shot noise, the design delivers a greater signal to noise ratio, especially in light-starved situations. Functionally similar to TDI arrays, the design consists of two parallel arrays of photodiode pixels. Each pixel is connected to a selectable delay gate that either allows charges through or delays the charges by one scan line. Signal electrons from the two arrays (one of which has been delayed) are then combined on-chip into a single output (with no increase in amplifier noise). Because the delay is selectable, the sensor allows bidirectional scanning. The design also preserves conventional linescan features such as exposure control and high blue response. This dual linescan CCD is available from Adept Electronic Solutions.

New GigE cameras available from Adept Electronic Solutions (28-Nov-2008)
The GigE uEye SE (Standard Edition) series is available from Adept Electronic Solutions. The GigE uEye SE models are not only driver compatible with all cameras of the uEye range and across all interfaces, but also use the same SDK.

MV-D1024E-3D01 camera for 3D profiling using laser triangulation available from Adept Electronic Solutions (18-Nov-2008)
The MV-D1024E-3D01 camera, distributed by Adept Electronic Solutions, contains an image pre-processing module that specifically detects laser lines and locates the central axis of the laser line in 3D using triangulation. The MV-D1024E-3D01 is ideal for 3D applications such as 3D profiling for quality control, PCB inspection, food inspection, packaging inspection, and much more.

View all  |  RSS Feed

Related Articles

Fluke-287 True-RMS Electronics logging multimeter available from RS Components (9-Jan-2009)
The Fluke-287 True-RMS Electronics logging multimeter with TrendCapture from RS Components quickly documents and graphically displays design performance. Its unique logging and graphing capabilities mean that it is no longer needed to download logged readings to a PC to detect a trend.

ServerMAX cabinets available from Diamond Australia (9-Jan-2009)
ServerMAX cabinets offer the customers the option of customizing the appearance of the racks to match their corporate logo and colour scheme. This high-end product can be made to meet the most exacting specifications.

Weller rework solder station available from RS Components (8-Jan-2009)
The Weller rework solder station, available from RS Components, has three independent tool channels with three temperature presets each, and automatic tool detection allowing simultaneous operation of three tools.

Kistler Staiger Mohilo torque transducers available from SI Instruments (8-Jan-2009)
Kistler Staiger Mohilo torque transducers, available from SI Instruments, offer a complete range of individually engineered force and torque measurement solutions to suit test rig applications, research and development, production processes and quality assurance.

Moxa’s EDS-510A industrial managed Ethernet switch available from CrispTech (8-Jan-2009)
CrispTech and Moxa offer EDS-510A, an industrial managed Ethernet switch that bears the IPv6 (Industrial Protocol version 6) Ready Logo.