Home > Optional digital panel meter for Modline 5 infrared thermometer

Optional digital panel meter for Modline 5 infrared thermometer

Supplier News
article image Digital panel meter for the Modline 5 infrared thermometer.

IRCON’s Digital Panel Meter (DPM), available from Active Instrument Services , is a complete remote setup and diagnostics tool option for the Modline 5 infrared thermometer.

The DPM provides remote communication to the Modline 5 via RS485.

The temperature display can be easily toggled between current, minimum and maximum temperature.

Each DPM display comes pre-loaded with the entire programming menu of the Modline 5.

Menu commands are listed in the same logical order as the rear keypad of the Modline 5 thermometer. This allows operators to add the panel mount display without learning new programming.

The DPM also provides remote initiation of Modline 5 diagnostics. A total system health check and dirty window detection of the Modline 5 can be initiated from the DPM keypad. If a fault is found, the DPM visually indicates that the thermometer should be checked.

The DPM has a 1/8 DIN panel mount and uses 85-240V ac.

The front bezel is NEMA rated to withstand moisture and corrosion.

The meter features a bright red 4 digit LED display and offers separate indication for F/C and setpoint alarms.

Ircon’s optional quad relay board providing four temperature setpoint relay contacts is also available from Active Instrument Services.

Newsletter sign-up

The latest products and news delivered to your inbox