The Hycontrol Reflex series of radar level transmitters from Accurate Detection are unaffected by pressure, temperature, viscosity, vacuum, foam, dust or changes in dielectric constant. Hycontrol Reflex radar level transmitters can measure virtually any product utilising either:
- Horn
- Wave guide
- Wave stick antenna
The Tank Bottom Following (TBF) mode in all the Hycontrol Reflex radar level transmitters enables products with dielectric constants as low as 1.1 to be measured. For process vessels with complex internal structures, the Empty Tank Spectrum (ETS) can be utilised to damp out all unwanted reflections from pipes, heating coils and agitators.
The advantages of Accurate Detection’s Hycontrol Reflex radar level transmitter include:
- Measuring ranges up to 40 metres (special option for 100 metres)
- Versatile technology for liquids, slurries, pastes and solids
- Display level, distance or volume
- Interface detection in liquids
- 2-wire loop powered or four wire 110/230vac
- Hazardous area approvals ATEX, EExd and EExia
- Hart, Profibus (PA) and Foundation Field-bus
- Suitable for narrow tanks with minimum fixed beam diameter
- Unaffected by dust during fill or empty conditions
- Immune to fill noise on solid products such as stone
- Simple to install and retrofit with wide range of process connections
- Suitable for corrosive and acidic atmospheres
- High temperature and pressure options
- Remote or local programming and commissioning
- Suitable for detecting levels though surface foam
- Sealed flange system allows removal in process