Meters from AMS Instrumentation and Calibration

• Yamatake flow metering systems include a new, exclusive high quality lining technology and a special mirror finish PFA lining offers higher anti adhesive properties than existing models
• The mirror finish PFA lining is particularly applicable for measurement of sticky pulp and gypsum slurries
• Only pure white PFA with no additives is used to make new linings
• The successful embedded punch plate that offers proven performance under conditions such as rapid thermal change and negative pressure. PFA linings with diameter ranges from 2.5 mm to 600 mm (0.1 to 24 inches) are available, making selection of the best lining easy for a wide variety of applications

• This detector can replace the detector interfaces of our existing models and those of other manufacturers

• A stainless steel case has been adopted for sizes of 2.5 mm to 200 mm
• A watertight meter and transmitter structure effective for environments where moisture and condensation tends to occur is used for the watertight model (model MGG18)

• A hose, union joint or clamp can be selected for very small size models (diameters of 2.5 to 15 mm (0.1 to 1/2 inches)
• A flange structure is available for all sizes (sizes of 2.5 to 1100 mm , 0.1 to 44 inches)
• A wafer construction can be also selected (sizes of 2.5 to 200 mm, 0.1 to 8 inches)
• Sizes of 65 and 125 mm (2½ and 5 inches) have been added to our existing product lineup

• Remote model converters can be used in combination with our conventional converters

• Model MGG 18/19 are suitable for use in FM/CSA  Nonincendive Class I, Division 2, Groups A, B, C and D; Class II, Division 2, Groups F and G and  Class III, Division 2

Learn more about Yamatake meters and transmitters by visiting the AMS Instrumentation and Calibration website. You will find the link below.