Home > Low voltage motor for process industries

Low voltage motor for process industries

Supplier News

A NEW motor designed for high reliability, targeted at the process industry, has been launched by ABB. The DriveIT low voltage motor M3000 range features improved cooling to double the life of bearings and windings, addressing the causes of 90 per cent of motor failures.

A large terminal box and a new terminal board enable easy installation.

Qualifying for the highest European efficiency class, eff1, and rated from 4-710kW, the new motor is intended for applications with high costs for unplanned stoppages, such as pulp & paper, metals, building materials, chemical, water and cement industries.

The DriveIT motor, with its new bearing end-shield and housing, features 20-30 per cent greater cooling surface than the previous motor generation, reducing the internal temperature considerably.

This gives longer component life and protects the motor from overheating, even when covered with dust. Particular attention has been paid to the design of the bearing housing.

Seventy per cent of motor failures in industry are due to bearing failure; with improved cooling, lubrication intervals are 50 per cent longer as lower temperature increases the life of the bearing grease.

The motors are fitted with SPM nipples for bearing monitoring as standard, and have dedicated areas to fit sensors for continuous vibration monitoring.

The high efficiency of the motor means lower heat losses. This results in lower winding temperature, reducing the incidence of winding failure, the cause of 20 per cent of motor failures.

The new motor is fitted with re-greasable bearings as standard, as appropriate re-greasing under a planned maintenance scheme will achieve the longest service life. The rating plate now gives information about recommended service intervals and appropriate grease quality.

ABB has re-introduced the valve disc to the whole range, a feature of many motor designs of the past but little used in recent years. This extracts excess grease from the bearing, protecting against over-greasing, which can cause bearing failure, by pushing expended and excess grease out through the grease outlet.

The motor housing has been generally strengthened. For example, a new foundry method has been developed following analysis of the resonance frequencies of the casing, minimising vibrations.

The larger terminal box enables easy servicing. Using a cable flange, the terminal box features a large recess where the cable is placed, rather than the standard arrangement with insertion through a drilled hole in the side.

A spacious interior accommodates the bends of heavy gauge cables. A new terminal board also makes the connection easier and faster.

The DriveIT motor is available in IEC frame sizes 112-400, 4-710kW. Cast iron enclosure is standard from frame size 160 and upwards, while aluminium is used in frame sizes 112-132.

All ABB motors are suitable for variable speed drive as standard. Special attention has been paid to ease of installation for encoders and forced ventilation. As with all of the M3000 range, factory supported design modifications are available. ABB Australia 02 9255 3999.

Newsletter sign-up

The latest products and news delivered to your inbox