Home > New fibre laser welding capabilities unveiled

New fibre laser welding capabilities unveiled

article image Laserdyne’s fibre laser welding technology and systems provide new capability and flexibility for welding a wide range of metals and alloys

Prima Power Laserdyne has developed the process and system capability for welding 2D and 3D components with high power CW and QCW fibre lasers.

According to Prima Power Laserdyne President Terry VanderWert, the new capabilities have been demonstrated on various metals and alloys including 304 stainless steel, titanium alloys such as Ti-6A1-4V and Ti-6Al-2Sn-4Zr-6Mo, and nickel based high temperature alloys such as Inconel 625, Inconel 718 and HastelloyX.

Mr VanderWert reports that the availability of the high power CW and QCW fibre laser with its kilowatt-level average power, 1 µm wavelength, and high brightness provides a laser source with new capability and flexibility. Compared to CO2 lasers for welding, the 1 µm wavelength of fibre lasers provides benefits in terms of simplified beam delivery using fibre optic cables instead of turning mirrors; greater absorption by metals, especially those that are good conductors of electricity such as aluminium and copper; and less absorption by the plasma plume that is formed above the weld pool.

While the LASERDYNE product line began with laser welding, there is wide acceptance of the Laserdyne brand and technology for laser cutting and drilling for aerospace applications. Prima Power Laserdyne’s laser welding systems have been supplied for aerospace, automotive, electronics, fluid couplings, and medical device applications using CO2, Nd:YAG and more recently, fibre laser sources.

Laserdyne has recently integrated fibre laser sources with their standard systems. Welding trials using a range of laser parameters and shield gases were performed. Metallography (cross-sections) and X-ray radiography were used to document the relationship between laser (spot size, laser power, etc.) and processing (shield gas type, gas flow rates, method of gas delivery, welding speed, focus position, etc.) parameters and the resulting weld geometry and structure. The trials revealed conditions that lead to weld porosity and those that give porosity-free welds in addition to showing the relationship between laser and processing parameters on weld shape and profile.

The most comprehensive investigation has recently centred on laser welding aerospace alloys. The major challenge for these materials is the stringent joint requirements including no tolerance for cracking or porosity in the weld. The weld geometry must also be correct with good mechanical properties at high temperatures. Testing by Prima Power Laserdyne has proven that both CW and QCW fibre lasers are capable of welding these alloys.

However, the challenge lies in developing and consistently delivering laser and processing parameters to produce quality welds. Laserdyne has developed the laser and processing parameters to weld the full range of aerospace alloys. Laserdyne’s studies prove that no single parameter controls weld quality, whereas, it is a combination of both laser and processing parameters that have a significant effect on the weld quality. These studies also show that crack and porosity-free welds can be readily produced in a range of nickel and titanium based alloys.

Laserdyne CW and QCW fibre lasers equipped with wire feed

Laserdyne’s welding trials included those with addition of filler wire. Certain alloys and dissimilar material combinations require the addition of filler material to control the structure of the weld metal and avoid cracking to ensure the required mechanical properties. In other cases, filler metal is used to control the weld geometry, such as to create a slight convexity of the weld fusion zone. Filler material is also used to compensate for poor fit up and mismatch during laser welding in a butt joint configuration. Laser welding with the filler wire is a multi-parameter process and there are a number of laser and filler wire parameters that determine the quality of the resultant weld. Laserdyne has developed and optimised all of the important parameters for adding filler material to produce quality welds.

Laserdyne testing leads to new laser system features

One significant development is a new focusing lens assembly with cross-jet design that maintains the compact profile of the LASERDYNE third generation BeamDirector, called BD3Y. The cross-jet feature provides a high velocity gas barrier that prevents metal sparks in the weld zone from contaminating the protective lens cover slide. Critical to this design is that the cross-jet prevents contamination or interference with the welding shield gas. Laserdyne’s cross-jet nozzle can be used with the entire range of shield gas delivery devices including welding shoe and coaxial gas nozzle tip.

The shielding gas shoe provides a controlled atmosphere for the weld zone while it is molten and cooling to a temperature level that won’t be compromised by the ambient atmosphere. This is important when welding materials, such as titanium alloys that have a strong affinity for oxygen and nitrogen in the ambient atmosphere. Another important benefit of the focusing lens/shield gas assembly design for laser welding is that they are quickly changeable in order to vary the focused spot size.

Enhanced fibre laser control results in higher quality welds

Laserdyne’s new laser control capabilities, notably laser power ramping and laser pulse shaping with sub-millisecond resolution, have been demonstrated using the LASERDYNE S94P control. This higher level of control leads to more consistent, higher quality welds. It increases the flexibility of LASERDYNE systems in terms of broadening the range of materials that can be laser welded. Pulse shaping has been shown to be effective in controlling the weld profile and structure, and is accomplished by controlling the temperature profile during weld formation and during cooling of the weld and heat affected zone.

Mr VanderWert concludes that all of the features described have been standardised and are available on the entire Laserdyne product line of 3 to 7 axes systems including LASERDYNE 795 and LASERDYNE 430BD.

Newsletter sign-up

The latest products and news delivered to your inbox