Product News

AB Autopack
5A Salisbury St
Botany NSW 2019
Tel: 02 9695 7084
Fax: 02 9315 7692

Supplier´s Website
Enquire now

Incorrect details?
Enquire NowVisit Website

Automatic tray erector-shrink wrapper line


AB AUTOPACK has released the model 60CZH30 tray packer, a low cost tray and shrink packaging system that enables small producers to pack their product for efficient handling in automated warehousing systems.


Automatic tray packer and shrink wrapper.

The model 60CZH30 was designed to fit the slow to medium production lines, featuring: simplicity, versatility, small size and small capital outlay.

The machine consists of a product infeed and collation section working in conjunction with an indexing tray carrier. The infeed section pre-groups the product, while the tray carrier draws the blank and pre-forms the tray before indexing forward to load the product, apply glue and fold the flaps.

When complete, the full tray passes through the shrink wrapper, where polyethylene film is wrapped around the tray then shrunk to form a solid pack ready to stack on pallet. The shrink-wrap film can be printed with bar codes to assist warehouse inventory management.

The machine features a Nordson Hot melt unit and a PLC control for precise index positioning and glue application.

Depending on product and method of collation, the machine can pack 12 to 15 trays per minute.

23-Oct-2003

Contact AB Autopack

Name:
Company Name:
Contact Number:
Email Address:
Your State:
Your Message:

Please uncheck this box if you don't want to receive the latest product updates in Ferret Daily Product News, Ferret's daily eNewsletter.

does not match
 
Your contact details will be passed onto this company ( see our Privacy Policy )
More Articles

AB Autopack News


Honey, I shrunk the packaging (28-Jul-2005)
Faster speeds, higher safety standards and greater machine monitoring control and correction are driving the development of shrink-wrapping equipment. Jamie Wade writes.

Print registration for shrink packaging. High-speed shrinkwrappers (26-Oct-2004)
AB Autopack has released shrinkwrappers designed for high-speed multipacking of beverage, grocery and other products.

News Sign up RSS Feed

Related Articles

SUPERBUILD pallet racking system available from Metalsistem Australia (16-Oct-2008)
Metalsistem Australia’s SUPERBUILD pallet racking system has been designed for medium to heavy duty storage. With high strength and stability, SUPERBUILD is available in different frame load options and is interchangeable with the heavy duty UNIBUILD series.

UNICANT cantilever racking system from Metalsistem Australia (15-Oct-2008)
Metalsistem Australia’s UNICANT cantilever racking system has been designed for the storage of long loads and is available in a range of standard sizes to suit all storage dimensions.

UNIRACK modular shelving system from Metalsistem Australia (14-Oct-2008)
The UNIRACK modular shelving series, available from Metalsistem Australia, has been designed for light to medium duty storage and suitable for the construction of single as well as two and three tier structures up to a maximum height of 8 metres.

SUPER 456 storage system available from Metalsistem Australia (13-Oct-2008)
The SUPER 456 shelving system, available from Metalsistem Australia, can be assembled with ease. An upright created as a closed box section without holes or cut outs, with eight location points on four sides for connecting unidirectional beams or bracing, makes the SUPER 456 storage system suitable for platforms and mezzanines.

Mid Comp International’s Odyssey supply chain software offered to Institute of Transport & Logistics Studies (13-Oct-2008)
Students doing their Master’s degree in Logistics Management or Transport Management at the University of Sydney are using sophisticated, industry-strength supply chain software on their laptops or home PCs. This supply chain software has been offered by Mid Comp International.

Access over 2000 Manufacturing and Operations jobs online!